-
-
Overview
-
TEVA Resin is available in three particle sizes (100-150 mm, 50-100 mm, and 20-50 mm), in the bottle sizes shown below or prepackaged in slurry packed 2 mL columns, 2 mL dry pack cartridges, and 47 mm discs. Contact us for availability of other column or cartridge sizes.
One of the more versatile of the analytical products is TEVA Resin. It has been applied on a routine basis to the analysis of technetium, the measurement of the tetravalent actinides, and the separation of americium from lanthanides. It is used alone or can be readily combined with other resins to perform more elaborate separations of multiple analytes.
The active component of the TEVA Resin is an aliphatic quaternary amine. With properties similar to those of typical strong base anion exchange resins. However, because the functional groups are in a liquid form, rather than fixed to a polymer backbone (as with IX resins), the liquid anion exchanger has greater flexibility to coordinate around target anions. Consequently, the uptake of anions is generally higher on TEVA Resin, and lower acid concentrations may often be empolyed to achieve separations.Please contact us at for specific academic pricing.
-
- Properties
- Applications
-
Overview
The uptake of selected metal ions on TEVA Resin from HNO3 and HCl is presented in Figures 2 and 3. Tetravalent plutonium, neptunium and thorium show maximum uptake in the region of 2 M to 4 M nitric acid. In this acid concentration range, hexavalent uranium and trivalent americium are not well retained. Therfore, TEVA Resin can readily separate the tetravalents from the other actinides. Due to this selectivity, TEVA is often utilized as the first resin in methods employing multiple stacked cartridges or columns in tandem separations. The decrease in k’ for the tetravalent actinides for HNO3 concentrations greater than 2-4M is due to competition from nitrate anions for complexation sites on the resin.
Figure 4 shows the effect of U(VI) and Th(IV) content on the uptake of Np(IV) by TEVA Resin from 5M HNO3. While the effect of Th(IV) is significant and linear, U(VI) doesn’t have much negative impact on Np retention until the concentration reaches 0.05M. In a 15 mL load solution, for example, this would correspond to about 180 mg of U(VI).
The matrix effects of various polyatomic anions on Np(IV) uptake by TEVA Resin from 2M HNO3 are shown in Figure 5. Oxalate shows the strongest effect on neptunium uptake. Oxalato complexes form readily with the tetravalent actinides, and these complexes are not extracted by the TEVA Resin. Oxalates are often used in stripping solutions of tetravalent actinides from TEVA Resin.
TEVA® Resin
TEVA® Resin
Catalog Number:
SPE1556046EIC
Mfr. No.:
TE-B25-A/B50-A/B100-A/B200-A/C50-A/B25-S/B50-S/B100-S/B200-S/R50-S/R50-S/B01-F/D50-F
Price:
$963
Size:
Quantity:
Add to Cart: