EDGE Automated Solvent Extraction System

The EDGE® is an automated extraction system that is faster than Soxhlet, more automated than QuEChERS, and simpler than other solvent extraction systems. It meets the requirements of US EPA Method 3545A. Extract a wide range of samples and sizes at least 3 times faster than other pressurized fluid extractors, including filtering, cooling, and washing. The EDGE has revolutionized the extraction process for sample preparation.

· Fastest technique available
· Sample holders are easily assembled and cleaned (Q-Cups)
· Small footprint
· One technology with unlimited applications

· Automated Extraction Process
Touch "start" to begin the automated process.
1. Select a Method
After a rack of Q-Cups containing samples are loaded into the EDGE, simply select the proper method, program the number of samples, and hit "Start".
2. Autosampler Loads Sample
The Q-Cup is automatically loaded into the chamber by the autosampler. The pressure cap then creates a pressurized seal on the top of the Q-Cup.
3. Matrix is Extracted
Solvent is added to the Q-Cup automatically, as outlined in the method, wetting the sample. As the chamber walls are heated, the pressure increases inside the Q-Cup and forces the solvent to disperse into the sample.
4. Extract is Collected
Once the sample reaches temperature, the solvent is dispended through the Q-Disc, the cooling coil, and into a collection vial.

· Q-Cup® Sample Holder
A simple solution to a complicated problem.
The aluminum Q-Cup sample holder consists of three easy-to-assemble pieces.

1. Q-Cup Cylinder
2. Q-Disc®
3. Threaded Bottom
The open top creates a dispersive effect which promotes rapid extraction and filtration. The disposable Q-Discs completely filters your sample prior to analysis. No additional steps are required. The simple design lends itself to easy cleaning.

· Loading the EDGE Rack
Load your samples in seconds.
Once the samples are placed in the Q-Cups, the Q-Cups are loaded into the rack along with the glass collection vials.

· Next, the rack is loaded into the EDGE. The samples are then ready for the automated extraction process.

· Flexible
Get better results with one instrument.
Dispersive Solid Phase Extraction
Pressurized Fluid Extraction
Supported Liquid Extraction
No need for multiple systems for different samples, EDGE is the answer for all extractions, made possible by Q-Cup Technology. No matter your technique, you'll extract a particle-free solution, ready for analysis.

· Compact
Its small size is a big advantage.
The EDGE is only 14.25" wide. That's about the width of an analytical balance. You can have multiple EDGE systems placed side-by-side on one bench top.

Please contact us at for specific academic pricing.