Sunpak-A, Porous Polymer Beads

Sunpak-A consists of highly cross-linked and high performance porous polymer beads developed using original technology. Sunpak-A displays high levels of resolution and quality. Separations can be performed using Sunpak-A for compounds in a wide variety of fields. Sunpak-A can also be used as a support by coating with stationary phases, allowing for analyses of compounds which cannot be separated on diatomaceous earth supports due to adsorption.

Column conditioning procedure
· Flow carrier gas at 40-50 ml/min for 20 minutes at room temperature.
· Increase the temperature from 40 to 250℃ at a rate of 2℃/min.
· Maintain the temperature at 250℃ for 20 hours to condition the column. For samples containing water and set the temperature of the injection port to 260-280℃.

Please contact us at for specific academic pricing.