SEPLITE® MB10 Mixed Bed Ion Exchange

- Overview
  - SEPLITE®MB10 is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resinsThe resins were prepared with fixed ratio, with the aim of producing high quality purified water.It could be loaded either in small cartridges and big industrial resin columns.By using this mixed bed resin, projects requiring high demineralized water and low silica, TOC could be handled.This resin is widely used in EDM application.
    
    Please contact us at for specific academic pricing.
- Properties
  - Categories
    
    Cation/anion Volume ratio 1:1
    
    Other Properties
    
    Matrix Structure: Polystyrene Crosslinked with DVB
    Shipped form: H+/OH-
    Physical Appearance: Mixture of white to yellow spheres
    Cation/Anion ratio: 50:50
    Functional Group: Sulphonic acid and trimethylammonium
    Particle size (mm): 0.315-1.25
    Moisture content (%): 57-67
    Total Capacity(eq/L): 1.9/1.0
    Bulk Density (g/l): 700-770
    Density (g/l): 1100-1200
    Whole beads count (%): ≥95
    
    Note
    
    Resins should be stored in sealed containers or bags where temperature was above 0°C in dry conditions without exposure to direct sunlight.
    Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
    In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
    Material and samples must be disposed according to local regulations.
    Dry polymers will expand when become wetted and may cause an exothermic reaction.
    Spilled materials may be slippery.
- Applications
  - Application
    
    Industrial demineralization

Documents

Resin Product Catalog

SEPLITE® MB10 Mixed Bed Ion Exchange

SEPLITE® MB10 Mixed Bed Ion Exchange

Documents

We Also Recommend

SEPLITE® MB20 Mixed Bed Ion Exchange

SEPLITE® MB30 Mixed Bed Ion Exchange

SEPLITE® MB35 Mixed Bed Ion Exchange