SEPLITE® LSC790 Chelating Resin

- Overview
  - SEPLITE® LSC 790 is a macroporous crosslinked polystyrene resin impregnated with Di-(2-EthylHexyl)Phosphoric Acid (D2EHPA).Generally the principle is impregnating D2EHPA on resins for easier separation and stripping.It also greatly simplify the process of operation.For performance, the selectivity of loaded resin is same or better than D2EHPA.To avoid loss of D2EHPA, Sunresin has specially designed the matrix for tighter bonding.Recommended operation PH is under 4, resins are ready to use upon receiving.
    
    Please contact us at for specific academic pricing.
- Properties
  - Categories
    
    D2EHPA impremented type, used for Scandium&Zinc recovery
    
    Other Properties
    
    Matrix Structure: Styrene-divinylbenzene copolymer
    Structure: Macroporous,D2EHPA loaded
    Physical Appearance: White spheres
    Particle range (mm): 0.35-1.65
    Moisture Content (%): 20-30
    Bulk Density (g/l): 600 (+/- 5%)
    Content D-2-EHPA(%): No less 40
    
    Note
    
    Resins should be stored in sealed containers or bags where temperature was above 0°C in dry conditions without exposure to direct sunlight.
    Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
    In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
    Material and samples must be disposed according to local regulations.
    Dry polymers will expand when become wetted and may cause an exothermic reaction.
    Spilled materials may be slippery.
- Applications
  - Application
    
    Scandium/Zinc Recovery

Documents

Resin Product Catalog

SEPLITE® LSC790 Chelating Resin

SEPLITE® LSC790 Chelating Resin

Documents

We Also Recommend

SEPLITE® LSC718 Specially developed resin for selective removal of radium

SEPLITE® LSC770 Chelating Resin

SEPLITE® Monojet™ LSC7105 Chelating Resin