Seplife® DX CM 25/80 Dextran-Based Ion Exchange Chromatography Resin

Seplife® DX CM 25/80 Dextran-Based Ion Exchange Chromatography Resin

Catalog Number:
CM01530352SUN
Mfr. No.:
D202721x
Price:
Size:
Quantity:
Add to Cart:
    • Overview
      • Designed for ion exchange chromatography of biomolecules

        Supplied in dry form

        Regulatory Support File (RSF) is available for Seplife® DX DEAE 50/80
        Seplife® DX DEAE 50/80 is a hydrophilic ion exchange media with controlled pore size distribution used in industrial applications, prepared by crosslinked dextran functionalized with weak base anion groups.
        Seplife® DX DEAE 50/80 is an ion exchange chromatographic resin based on crosslinked dextran functionalized with weak base anion with a large particle size (40-120 micron).

        Please contact us at for specific academic pricing.

        More Details

    • Properties
      • Categories
        Dextran-Based Chromatography Resins
        Other Properties
        Appearance: White spherical beads
        Type: Weak acid cation - Carboxy methyl
        Matrix: Crossed linked dextran
        Ion exchange capacity (mmol/g): 4.0-5.0 (H+)
        Particle size (dry, µm): 40-120
        Swelling property (ml/g): 6.5-8.5
        pH stability: 6-10 (operational), 2-13 (CIP)
        Chemical Stability: Stable in all common aqueous buffers; 1M sodium hydroxide; 8M urea; 6M guanidine hydrochloride; 70% ethanol.
        Flow rate* (cm/h): max. 600
        Shipped as: Dry

        *Testing conditions: Chromatography column 16mm×200mm; column bed height 15cm; temperature 25°C; mobile phase 0.1M NaCl

        * For Research Use Only.

    • Applications
      • Application Description
        Seplife® DX CM 25/80 is provided as a dry powder and needs to be swollen when used. The swelling ratio depends on the buffer solution used. The swelling ratio can vary significantly in different solution compositions. Do not use magnetic stirring during swelling, to avoid breaking the particles.
        Product pretreatment Weigh the required amount of Seplife® DX CM 25/80, add 50~100 times distilled water or equilibration buffer, and let it swell. Swelling typically takes 1-2 days at room temperature, or 2 hours in boiling water.

        Column packing
        Column packing should be done according to standard operating procedures. It is important to ensure that each material is at its working temperature, and the chromatography media may need to be degassed before column packing.
        Note: If the column is packed at the maximum linear flow rate, the flow rate during the subsequent chromatographic separation should not exceed 75% of the column packing flow rate.

        Equilibration
        Equilibrate the column with an appropriate 2-5 column volume buffer. Ensure the conductivity and pH of the effluent are the same as the buffer.

        Sample feeding
        Determine the loading amount according to the target product concentration and the loading capacity of the media. Samples with particulates and precipitate should be filtered or centrifuged before the chromatography purification.
        Cleaning
        After loading the sample, equilibrate the column with loading buffer to wash away unbound proteins and impurities until the conductivity and pH of the effluent are exactly the same as those of the loading buffer.

        Elution
        Use continuous or gradient elution with increasing salt concentration in the buffer or increasing pH.

        Regeneration
        First remove the impurities from the column with 1-2M NaCl. Then remove the salt on the column with distilled water or equilibration buffer.

        Storage
        Seplife® DX CM 25/80 dry powder should be stored in a dry, ventilated and clean place at 4-30°C; the hydrated media should be stored in 20% ethanol solution or 0.01M NaOH at 4-8°C.