Categories
Gel type,Strong Acid, ST-DVB, Na+ Form
Other Properties
Matrix Structure: Polystyrene Crosslinked with DVB
Functional group: Sulfonic acid
Shipping form: Sodium or Hydrogen
Physical Appearance: Yellow to brown Spherical beads
Particle size (mm): 0.315-1.25
Moisture content (%): 43-48 (Sodium Form)
Total Capacity(eq/L): ≥2.0
Bulk Density ( g/l): 780-870
Density ( g/l): 1240-1280
Whole beads count (%): ≥95
Uniformity coefficient: <1.6
Note
SEPLITE® SC 130 is a high purity strong acid cation resin, gel type, with 8% crosslinking.
It is mainly designed for the water demineralization in industrial application and also for softening of potable water.
Its excellent mechanical strength and good ion exchange kinetics make it a good general-purpose resin in different applications. Compared with other resins in market, this resin distinguishes itself for its long service life.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
Physical and Chemical Characteristics:
Physical and Chemical Characteristics
Matrix Structure
Polystyrene Crosslinked with DVB
Functional group
Sulfonic acid
Shipping form
Sodium or Hydrogen
Physical Appearance
Yellow to brown Spherical beads
Particle size (mm)
0.315-1.25
Moisture content (%)
43-48 (Sodium Form)
Total Capacity(eq/L)
≥2.0
Bulk Density ( g/l)
780-870
Density ( g/l)
1240-1280
Whole beads count (%)
≥95
Uniformity coefficient
<1.6
Key features and benefits:
High operating capacity
Good kinetic performance
Long lifetime
Easy to regeneration
Applications:
Industrial water softening
Industrial water demineralization
Other applications please seek help from Sunresin
Resins should be stored in sealed containers or bags where temperature was above 0°C in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.