SEPLITE® CT10 Adsorbent Resin

SEPLITE® CT10 Adsorbent Resin

Catalog Number:
AR01110738SUN
Mfr. No.:
CT10
Price:
Quantity:
Add to Cart:
    • Overview
      • SEPLITE® CT10 is a specially developed polymeric adsorbent resin for Volatile organic compounds (VOCs).
        Its adsorptive properties derive from its macroreticular pore structure, high surface area, designed pore size distribution, and the aromatic nature of its surface.SEPLITE® CT10 could be used for the adsorption and recovery of VOCs with Low & medium concentration Iike:Alkanes (n-hexane, heptane, cyclohexane, etc.), halogenated hydrocarbons (trichloroethane) Alkene, tetrachloroethylene, trichloroethane, dichloromethane, chloroform, chlorobenzene, etc., aromatic hydrocarbons (benzene,Toluene, xylene, etc.) and lower alcohols (isopropanol, butanol, etc.), ketones (acetone, methyl organic substances such as isopropanone, methyl ethyl ketone, cyclohexanone, esters (ethyl acetate, butyl acetate) etc.It has excellent physical, chemical, and thermal stability, enjoyed over 90% VOCs recovery and served quite long lifeby steam regeneration. Compared with Activated carbon, SEPLITE® CT10 has the advantages of higher adsorption rate, lower operation cost, longer lifespan and more clean in production etc.

        Please contact us at for specific academic pricing.

    • Properties
      • Categories
        Polymeric adsorbent for Volatile Organic Compounds adsorption
        Other Properties
        Matrix Structure: Styrene-divinylbenzene
        Physical Appearance: Reddish brown spherical beads
        Particle size (mm): 0.6-1.2mm
        Moisture content (%): 54-65
        Bulk Density ( g/l): 650-750
        Whole beads count (%): ≥95
        Specific Surface Area: 1000—1200 m2 /g
        Note
        Resins should be stored in sealed containers or bags where temperature was above 0°C in dry conditions without exposure to direct sunlight.
        Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
        In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
        Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
    • Applications
      • Application
        Volatile Organic Compounds Adsorption

Note: If you don't receive our verification email, do the following:

  • Confirm that you entered your email address correctly.
  • Check if the email is in your spam or junk folder.
  • Or you may contact us at .
  • Copyright © Amerigo Scientific. All rights reserved.