Water Purifier System 30L/H
| Cat. No. | Dimensions (WxDxH) | Specification | Unit | Price | Quantity |
|---|---|---|---|---|---|
| WPS1504096-01 | 41×22×42 cm | Flow rate: 2 Liters/minute (with pressure tank) | EA | $1,296 |
|
Product Description
Product Description
Water purifier is an economical choice of pure water for daily laboratory analysis. The water output per hour is 15-30 liters, and the resistivity is 15-18.2 MΩ.cm, which meets the requirements of most chemical and biological experimental water.
Working Environments
· Inlet water: Tap water (TDS<200ppm will be suggested).
If inlet water TDS>200ppm, pretreatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge.
· Work temperature: 5-45°C
· Pressure: 1.0-4.0Kgf/cm2
· Power: AC100-240, 50/60Hz, 48W
Working Environments
· Inlet water: Tap water (TDS<200ppm will be suggested).
If inlet water TDS>200ppm, pretreatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge.
· Work temperature: 5-45°C
· Pressure: 1.0-4.0Kgf/cm2
· Power: AC100-240, 50/60Hz, 48W
Specifications
Feed water requirements: Tap water, inlet TDS<200 ppm, 5-45°C, 1.0-4.0kgf/cm2 (if inlet TDS>200ppm, extra pretreatment is recommended)
Flow procedure: PF+AC+RO+DI
Quality of deionized water:
· Resistivity: 15-18.2MΩ.cm
· Conductivity: 0.067-0.055µs/cm
· Bacteria: N/A
· Particles (>0.2μm): N/A
Quality of reverse osmosis water:
· Ion rejection rate: 96-99% (with new RO membrane)
· Organics rejection rate: >99% (when MW>200 Dalton)
· Particles and bacteria rejection rate: >99%
· Output(25°C): 15 Liters/hour
· Flow rate: 2 Liters/minute(with pressure tank)
· Pure water outlet: RO water, deionized water
· Dimension/weight: Length×Width×Height: 41×22×42cm / 20Kg
· Electric requirements: AC100-240V, 50/60Hz, 48W
Flow procedure: PF+AC+RO+DI
Quality of deionized water:
· Resistivity: 15-18.2MΩ.cm
· Conductivity: 0.067-0.055µs/cm
· Bacteria: N/A
· Particles (>0.2μm): N/A
Quality of reverse osmosis water:
· Ion rejection rate: 96-99% (with new RO membrane)
· Organics rejection rate: >99% (when MW>200 Dalton)
· Particles and bacteria rejection rate: >99%
· Output(25°C): 15 Liters/hour
· Flow rate: 2 Liters/minute(with pressure tank)
· Pure water outlet: RO water, deionized water
· Dimension/weight: Length×Width×Height: 41×22×42cm / 20Kg
· Electric requirements: AC100-240V, 50/60Hz, 48W
Related Products
Lab Brightness Transparent Water Bath SY-8L
Price: $0 - $132
Thermostatic Water Bath
Price: $114
Online Inquiry
Note: If you don't receive our verification email, do the following:
- Confirm that you entered your email address correctly.
- Check if the email is in your spam or junk folder.
- Or you may contact us at
.
