HPP Polypropylene Pre-filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504359-01	Membrane: Polypropylene (PP)	each	Inquiry

Product Description

Product Description

Quality:
· 100% Integrity testing in manufacturing
· Each filter is fully traceable with unique serial number
· Manufactured in a facility which adheres to ISO 9001:2015 Practices

Features

· Continuously reliable high filtration efficiency
· Filter media that can withstand high backlash pressure differences reduce filter replacement cycles and production costs
· Wide chemical compatibility, suitable for filtering various acids, bases and solvents
· A series of removal ratings from 0.1um to 70um meet various filtering situations

Specifications

Materials of Construction

Membrane	Polypropylene (PP)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Filtration Area

Outer Diameter	Removal Rating	Area / 10'
68mm	0.2 μm	0.50 m²
68mm	0.45 μm	0.48 m²
68mm	1.0 μm	0.53 m²
68mm	3.0 μm	0.57 m²
68mm	5.0 μm	0.57 m²
68mm	10 μm	0.62 m²
68mm	20 μm	0.63 m²

Particle Retention

Retention Rates of Each Particle Size（%）
HPP	1.0 μm	3.0 μm	5.0 μm	10 μm	20 μm
0.2 μm	≥99.90	≥99.90	≥99.90	≥99.90	≥99.90
0.45 μm	≥99.00	≥99.50	≥99.90	≥99.90	≥99.90
1.0 μm	≥90.00	≥95.00	≥99.00	≥99.50	≥99.90
3.0 μm	-	≥90.00	≥95.00	≥99.00	≥99.50
5.0 μm	-	-	≥90.00	≥95.00	≥99.00
10 μm	-	-	-	≥90.00	≥95.00
20μm	-	-	-	-	≥90.00

Sterilization

In-line steam sterilization

Up to 20 cycles (125°C for 30 minutes < 30 kPa per cycle)

Regulatory Compliance

Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Removal Rating	End Cap	Nominal Length	Seal Material	Industry
Blank 68mm	HPP	0020 0.2 µm	DOE Double Open End	05 5 inch	S Silicone	C
71 71mm		0045 0.45 µm	HTF 222/Fin (PBT Insert)	10 10 inch	E EPDM	P
		0100 1.0 µm	HSF 226/Fin (PBT Insert)	20 20 inch	V Viton	F
		0300 3.0 µm	HTCG 222/Flat (PBT Insert)	30 30 inch	P FEP/PFA encapsulated O-rings
		0500 5.0 µm	HSCG 226/Flat (PBT Insert)	40 40 inch
		1000 10 µm
		2000 20 µm

*示例: HPP0020DOE05SC (HPP, 0.2µm, Double open end, 5 inch, Silicone, Industrial)

Applications

Application Description

Pre-filtration of infusion solutions, biological products and fermentation solutions
Pre-filtration and fine filtration of process water
Security filtration of reverse osmosis water treatment process