PFAT All-teflon Corrosion Resistance Filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504362-01	Membrane: Hydrophobic polytetrafluoroethylene (PTFE)	each	Inquiry

Product Description

Product Description

Quality:
· 100% Integrity testing in manufacturing
· Each filter is fully traceable with unique serial number
· Manufactured in a facility which adheres to ISO 9001:2015 Practices

Features

· 100% all fluoropolymer construction
· Excellent chemical compatibility
· 100% integrity testing to ensure the integrity of the cartridge
· Better resistance to high temperature and pressure
· High flow rate
· Low differential pressure
· Low leachables

Specifications

Materials of Construction

Membrane	Hydrophobic polytetrafluoroethylene (PTFE)
Support	Polyfluoroalkoxy (PFA)
Core/Cage/End Caps	Polyfluoroalkoxy (PFA)
End Cap Inserts	316L (With FSSC, FSSF, FSTC) End Caps
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Filtration Area

Outer Diameter	Membrane Pore Size	Area/10'
68 mm	0.2 μm	0.91 m²

Integrity Standard @10inch, 20°C

Membrane Pore Size	Bubble Point	Diffusion Flow(Air)
0.22 μm	≥ 0.10 MPa, 60% IPA 40% Water, Air test	/

Bacterial Retention

Model	Content
0.2 μm	Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta（ATCC19146）according to ASTM F838 methodology

Sterilization

In-line steam sterilization	Up to 15 cycles (135°C for 30 min and differential pressure < 30 kPa per cycle)
Autoclave	Up to 120 cycles (130°C for 30 min per cycle)

*Only FSS, FSSF and FSTC end cap can be in-line steam sterilized.

Regulatory Compliance

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Pore Size	End Cap	Nominal Length	Seal Material	Industry
68mm	PFAT	0020 0.20 µm	SF 226/Fin (not support In-line steam sterilization)	03 3 inch	S Silicone	C
			SC 226/Flat (not support In-line steam sterilization)	04 4 inch	E EPDM	P
			TC 222/Flat (not support In-line steam sterilization)	10 10 inch	K PTFE
			FSSC 226/SS Insert Flat (support In-line steam sterilization)	20 20 inch	P FEP/PFA encapsulated O-rings
			FSSF 226/SS Insert Fin (support In-line steam sterilization)
			FSTC 222/SS Insert Flat (support In-line steam sterilization)