DPSHPC Sterilizing-Grade Liquid Filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504295-01	Membrane: Hydrophilic polyethersulfone (PES)	each	Inquiry

Product Description

Product Description

The DPSHPC series filter cartridge is composed of a unique PES filter membrane. It can remove small particles, bacteria and endotoxins in the solution. The endotoxin removal efficiency in the physiological saline solution is more than 99%.

Quality:
· 100% Integrity testing in manufacturing
· Each filter is fully traceable with unique serial number
· Manufactured in a facility which adheres to ISO 9001:2015 Practices

Features

· Modified PES
· Fast flow rate and high throughput
· pH1-14 tolerant
· Can be pre-disinfected with NaOH
· Good sterilization performance

Specifications

Materials of Construction

Membrane	Hydrophilic polyethersulfone (PES)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Integrity Test Standards @10inch, 20°C

Membrane Pore Size	Bubble Point	Diffusion Flow (Air)
0.22+0.22μm	≥ 0.32 MPa (water), Air test	≤ 28 ml/min @ 0.275 MPa (water)

Bacterial Retention

Model	Content
DPSHPC 0.22μm	Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology.

Sterilization

In-line steam sterilization	Up to 50 cycles (135°C for 30 min and differential pressure < 30 kPa per cycle)
Autoclave	Up to 50 cycles (130°C for 30 min per cycle)

Regulatory Compliance

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Membrane Pore Size	End Cap	Nominal Length	Seal Material	Industry
69mm	DPSHPC	2222 0.22+0.22µm	DOE Double Open End	05 5 inch	S Silicone	P
			HTF 222/Fin	10 10 inch	E EPDM
			HSF 226/Fin	20 20 inch	V Viton
			HTCG 222/Flat	30 30 inch	P FEP/PFA encapsulated O-rings
			HSCG 226/Flat	40 40 inch

* Example: DPSHPC2222DOE05SP (DPSHSL, 0.22+0.22µm, Double open end, 5 inch, Silicone, Pharmaceutical)

Applications

Application Description

Sterile and depyrogenation filtration for LVP and SVP
Sterile and depyrogenation filtration for antibiotic solution
Sterile and depyrogenation filtration for physiological saline and other solvents