| Cat. No. | Specification | Unit | Price | Quantity |
|---|---|---|---|---|
| FCM1504298-01 | Membrane: Nylon 66 | each | Inquiry |
|
| Membrane | Nylon 66 |
| Support | Polypropylene (PP), polyester (PET) |
| Core/Cage/End Caps | Polypropylene (PP) |
| End Cap Inserts | Polybutylene terephthalate (PBT) |
| Seal Material | Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings |
| Max. Operating Temperature | 80°C |
| Max.Operating Pressure | 0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C |
| Max. Differential Pressure (Forward) | 0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C |
| Max. Differential Pressure (Reverse) | 0.30 MPa@25°C 0.10 MPa@80°C |
| Outer Diameter | Membrane Pore Size | Area/10' | |
| DN66PC | 69 mm | 0.22+0.22 μm | 0.58 m² |
| 69 mm | 0.45+0.22 μm | 0.68 m² | |
| 71 mm | 0.45+0.22 μm | 0.82 m² | |
| 69 mm | 1.2+0.45 μm | 0.84 m² | |
| N66PC | 69 mm | 0.22 μm | 0.65 m² |
| Membrane Pore Size | Bubble Point | Air Diffusion |
| 0.22+0.22 μm | ≥ 0.30 MPa (water), Air test | ≤ 16 ml/min @ 0.275 MPa (water) |
| 0.45+0.22 μm(outer diameter 69mm) | ≥ 0.30 MPa (water), Air test | ≤ 20 ml/min @ 0.275 MPa (water) |
| 0.45+0.22 μm(outer diameter 71mm) | ≥ 0.30 MPa (water), Air test | ≤ 24 ml/min @ 0.275 MPa (water) |
| 1.2+0.45 μm | ≥ 0.12 MPa (water), Air test | ≤ 18 ml/min @ 0.1 MPa (water) |
| Membrane Pore Size | Bubble Point | Air Diffusion |
| 0.22 μm | ≥ 0.30 MPa, Wetted with water, Air test | / |
| Model | Content |
| 69DN66PC 0.22+0.22 μm | Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology. |
| 69DN66PC 0.45+0.22 μm | |
| 71DN66PC 0.45+0.22 μm | |
| 69DN66PC 1.2+0.45 μm | Bacterial quantitative retention of 10⁷ cfu/cm² Serratia marcescens (ATCC14756) according to ASTM F838 methodology |
| N66PC 0.22 μm | Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology. |
| In-line steam sterilization | Up to 10 cycles (121°C for 30 minutes and differential pressure <30KPa per cycle ) |
| Outer Diameter | Type | Membrane Pore Size | End Cap | Nominal Length | Seal Material | Industry |
| 69mm | DN66PC | 0022 0.22 µm | DOE Double Open End | 05 5 inch | S Silicone | P |
| 71 71mm | 2222 0.22+0.22 µm | HTF 222/Fin (PBT insert) | 10 10 inch | E EPDM | ||
| 4522 0.45+0.22 µm | HSF 226/Fin (PBT insert) | 20 20 inch | V Viton | |||
| 1245 1.2+0.45 µm | HTCG 222/Flat (PBT insert) | 30 30 inch | P FEP/PFA encapsulated O-rings | |||
| HSCG 226/Flat (PBT insert) | 40 40 inch |
| Outer Diameter | Type | Membrane Pore Size | End Cap | Nominal Length | Seal Material | Industry |
| 69mm | N66PC | 0022 0.22 µm | DOE Double Open End | 05 5 inch | S Silicone | P |
| 71 71mm | 0045 0.45 μm | HTF 222/Fin (PBT insert) | 10 10 inch | E EPDM | ||
| 0120 1.2 μm | HSF 226/Fin (PBT insert) | 20 20 inch | V Viton | |||
| HTCG 222/Flat (PBT insert) | 30 30 inch | P FEP/PFA encapsulated O-rings | ||||
| HSCG 226/Flat (PBT insert) | 40 40 inch |
Note: If you don't receive our verification email, do the following:
.
Seamless access to cutting-edge products and services with our professional support.
