DLHPVDF/LHPVDF Sterilizing-Grade Liquid Filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504297-01	Membrane: Hydrophilic polyvinylidene fluoride (PVDF)	each	Inquiry

Cat. No.

Specification

Unit

Price

Quantity

FCM1504297-01

Membrane: Hydrophilic polyvinylidene fluoride (PVDF)

each

Specifications

Membrane	Hydrophilic polyvinylidene fluoride (PVDF)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Membrane Pore Size	Bubble Point	Air Diffusion
0.1 μm	≥ 0.16 MPa, Wetted with 60% IPA, Air Test	≤ 30 ml/min @ 0.386 MPa, Water Wetting
0.22 μm	≥ 0.32 MPa, Water wetting, Air Testing	≤ 20 ml/min @ 0.28 MPa, Water Wetting
0.45 μm	≥ 0.12 MPa, Water wetting, Air Testing	≤ 10 ml/min @ 0.10 MPa, Water Wetting
0.65 μm	≥ 0.10 MPa, Water Wetting, Air Testing

Model	Content
DLHPVDF 0.22+0.22 μm	Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology.
DLHPVDF 0.45+0.22μm
DLHPVDF 0.45+0.45 μm	Bacterial quantitative retention of 10⁷ cfu/cm² Serratia marcescens (ATCC14756) according to ASTM F838 methodology.
DLHPVDF 0.65+0.45 μm
LHPVDF 0.1μm	Bacterial quantitative retention of 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology.
LHPVDF 0.22μm
LHPVDF 0.45 μm	Bacterial quantitative retention of 10⁷ cfu/cm² Serratia marcescens (ATCC14756) according to ASTM F838 methodology.

In-line steam sterilization	Up to 50 cycles (135°C for 30 min and differential pressure < 30 kPa per cycle)
Autoclave	Up to 50 cycles (130°C for 30 min per cycle)

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

DLHPVDF (Double-layer)

Outer Diameter	Type	Membrane Pore Size	End Cap	Nominal Length	Seal Material	Industry
69mm	DLHPVDF	2210 0.22+0.1µm	DOE Double Open End	05 5 inch	S Silicone	P
		2222 0.22+0.22µm	HTF 222/Fin (PBT insert)	10 10 inch	E EPDM
		4522 0.45+0.22µm	HSF 226/Fin (PBT insert)	20 20 inch	V Viton
		4545 0.45+0.45µm	HTCG 222/Flat (PBT insert)	30 30 inch	P FEP/PFA encapsulated O-rings
		6545 0.65+0.45µm	HSCG 226/Flat (PBT insert)	40 40 inch

LHPVDF (Single-layer)

Outer Diameter	Type	Membrane Pore Size	End Cap	Nominal Length	Seal Material	Industry
69mm	LHPVDF	0010 0.1µm	DOE Double Open End	05 5 inch	S Silicone	P
		0022 0.22μm	HTF 222/Fin (PBT insert)	10 10 inch	E EPDM
		0045 0.45μm	HSF 226/Fin (PBT insert)	20 20 inch	V Viton
		0065 0.65μm	HTCG 222/Flat (PBT insert)	30 30 inch	P FEP/PFA encapsulated O-rings
			HSCG 226/Flat (PBT insert)	40 40 inch

* Example: DLHPVDF2210DOE05SP (DLHPVDF, 0.22+0.1µm, Double open end, 5 inch, Silicone, Pharmaceutical)