BevPure XL Filter Cartridges

Cat. No.	Specification	Unit	Price	Quantity
FCM1504344-01	Filter Media: Asymmetric PES Membrane	each	Inquiry

Product Description

Product Description

· Highly asymmetric PES membrane provides high dirt holding capacity for longer service life
· Each filter is individually Integrity Tested prior to factory dispatch
· Available in ratings from 0.1µm to 1.2µm for precise bacteria and particle removal
· Complies with Food Contact Regulations: FDA 21CFR177-182 and 1935/2004 EC

Specifications

Materials of Construction

Filter Media	Asymmetric PES Membrane
Cage/Support	Polypropylene
Core/End Caps	Polypropylene

Operating Conditions

Max. Operating Pressure	6.9 bar (100 psi) at 25°C 2.4 bar (35 psi) at 80°C
Max. Differential Pressure (Forward)	6.9 bar (100 psi) at 25°C 2.4 bar (35 psi) at 80°C
Max. Differential Pressure (Reverse)	3.0 bar (44 psi) at 25°C 1.0 bar (15 psi) at 80°C
Bubble Point(BPXLR)	≥3.4 bar (49 psi), air, 0.22μm ≤ 30 mL/min at 2.5 bar, water
Sterilzation	Inline Steam Sterilization: 100 cycles for 30 minutes at 135°C (< 0.3 bar, 5 psi). Autoclave: 200 cycles for 30 minutes at 130°C. Hot water sanitization: 50 cycles for 30 minutes at 85°C Chemistry sanitization: 50 cycles for 30 minutes at 40°C in a mix solution of sodium hypochlorite (NaClO, 100 ppm) and peroxyacetic acid (100 ppm).
Cleaning Solution	2% NaOH Solution @≤ 65°C
Effective Filtration Area	0.58m² / Ø69-10 inch

Reliable Microbiological Control

The primary purpose of a membrane filter cartridge in beverage processing is to effectively control spoilage microorganisms.

Typical Log Reduction Value (LRV)
	B.diminuta	Lactobacillus Brevis	Sasharomyces Cerevisiae
0.2μm	>7cm²	N/A	N/A
0.45μm	N/A	>7cm²	>7cm²
0.65μm	N/A	>4cm²	>7cm²
0.8μm	N/A	N/A	>7cm²
1.2μm	N/A	N/A	>7cm²

Ordering Information:

Series	Removal Ratings	End Cap	Nominal Length	Seal Material	Industry
BPXL-R Ф69	0022 0.22µm	DOE Double Open End	05 5 inch	S Silicone	F
	0045 0.45µm	HTC 222/Flat (PBT Insert)	10 10 inch	E EPDM
	0065 0.65µm	HTF 222/Fin (PBT Insert)	20 20 inch	V Viton
	0080 0.8µm	HSF 226/Fin (PBT Insert)	30 30 inch
	0120 1.2µm	SSF 226/Fin (SS Insert)	40 40 inch
		SSC 226/Flat (SS Insert)
		STF 222/Fin (SS Insert, 3 Tabs)

* Example: BPXL-R0022DOE05SF (BPXL-R, 0.22µm, Double open end, 5 inch, Silicone, Food & Beverage)