APP Polypropylene Pre-filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504346-01	Membrane: Polypropylene (PP)	each	Inquiry

Product Description

Product Description

Quality:
· Each filter is fully traceable with unique serial number
· Manufactured in a facility which adheres to ISO 9001:2015 Practices

Features

· The unique double layer gradient precision structure (Constant density tapered pores) provides high dirt holding capacity and long service life
· Nanofiber media ensured the removal of penetrated colloid and bacteria, which significantly improves the filtration efficiency

Specifications

Materials of Construction

Membrane	Polypropylene (PP)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max. Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Operating Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Operating Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Filtration Area

Outer Diameter	Removal Rating	Area/10'
71mm	0.2 μm	0.55 m²
71mm	0.3 μm	0.44 m²
71mm	0.5 μm	0.44 m²
71mm	0.65 μm	0.60 m²
71mm	0.8 μm	0.62 m²
71mm	1.0 μm	0.60 m²
71mm	3.0 μm	0.60 m²
71mm	5.0 μm	0.65 m²
71mm	6.0 μm	0.55 m²
71mm	10 μm	0.69 m²

Particle Retention

Retention Rates of Each Particle Size（%）
APP	1.0 μm	3.0 μm	4.0 μm	5.0 μm	6.0 μm	7.0 μm	10 μm	20 μm
0.2 μm	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.3 μm	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.5 μm	≥99.90	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.65 μm	≥99.50	≥99.90	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.8 μm	≥99.20	≥99.50	≥99.90	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99
1.0 μm	≥99.00	≥99.20	≥99.50	≥99.90	≥99.98	≥99.99	≥99.99	≥99.99
3.0 μm	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.98	≥99.99	≥99.99
5.0 μm	-	-	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.98
6.0 μm	-	-	-	-	≥99.90	≥99.20	≥99.50	≥99.90
10 μm	-	-	-	-	-	-	≥99.00	≥99.20

Sterilization

In-line steam Sterilization

Up to 20 cycles (125°C for 30 min and differential pressure < 30 kPa per cycle)

Regulatory Compliance

Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Removal Rating	End Cap	Nominal Length	Seal Material	Industrial
71 71mm	APP	0020 0.2 µm	DOE Double Open End	05 5 inch	S Silicone	C
		0030 0.3 µm	HTF 222/Fin (PBT Insert)	10 10 inch	E EPDM	P
		0050 0.5 µm	HSF 226/Fin (PBT Insert)	20 20 inch	V Viton	F
		0065 0.65 µm	HTCG 222/Flat (PBT Insert)	30 30 inch	P FEP/PFA
		0080 0.8 µm	HSCG 226/Flat (PBT Insert)	40 40 inch
		0100 1.0 µm
		0300 3.0 µm
		0500 5.0 µm
		0600 6.0µm
		1000 10.0µm
		2000 20.0µm

* Example: APP0020DOE05SC (APP, 0.2µm, Double open end, 5 inch, Silicone, Industrial)

Applications

Application Description

Gel Material pre-filtration
Blood Product pre-filtration
API pre-filtration
Dispensing System pre-filtration