Tap water systems Q-FRONT 5 EDI Pure, for inorganic analytical methods (Type 2)

Reliable operation
Low running costs
Convenient user interface
Water tank required, not included
Easy installation and maintenance

Cat. No.	Dimensions (WxDxH)	Specification	Unit	Price	Quantity
WPS1401627-01	353954 cm	Nominal water flow: 5L/h	EA	$3,707

Add to Cart

Product Description

Product Description

The compact and user-friendly Q-Front EDI Pure systems are highly recommended as the pure water source in your laboratory, providing Grade 2 water for a wide range of general laboratory applications.
The Q-Front EDI Pure systems purify the incoming feed water by deionization or electrodeionization (EDI) technology. EDI is the most cost-effective long-term solution due to reduced running costs, as no deionization cartridges have to be replaced.

Product Details

Weight

System weight: 16kg
Operating weight: 18kg

Accessory

1. Universal remote dispenser
With 3 m supply hose w/ fixed stand w/o controller, suitable for any pressurized water system storing Pure (Grade 2) or RO water.
2. Water distribution module
3. Water storage tank "Pro", 30L
w/o multipoint sensor
Opaque housing walls for protection against the light
25L usable volume
Gravity outlet
Delivery pump option
Dimensions: 39*44*60 cm
Weight: 6.5kg
4. Water storage tank "Comfort" 60L w/ base, tap and multi-point level switch
Automatic UV sanitization (UV lamp) module (optional)
Delivery pump (optional)
Multiposition level sensor option
Gravity outlet
Compatible with all tap water systems
Dimensions: 42*42*85 cm
5. Water storage tank "Comfort" w/ base, tap and level switch, 100L
Dimensions (W*D*H): 45*45*112 cm
6. Water storage tank "Comfort" w/ level switch, 200L
Dimensions (W*D*H): 55*55*134 cm
7. Upcharge for storage tank “Comfort”Water storage tank "Comfort" w/ level switch, 300L
Dimensions (W*D*H): 66*66*144 cm
8. UV sterilization module 24V
9. Tank CO2 trap with microfilter
10. External pre-filter set (polyphosphate/carbonpp/1μm) with manometer
11. AquaStop
Water leakage protection system.

Note

FEED WATER REQUIREMENTS:
Feed water: Potable tap water
Pressure: 0.4-6bar
Conductivity: <2000μS/cm
Temperature: 5-35°C
If the feed water does not meet specifications, additional pre-treatment solutions are available.

Specifications

Parameters	5 EDI Pure	10 EDI Pure	15 EDI Pure	10 Pure
Grade 2 water resistivity at 25 °C	≥10 … 5 MΩ x cm	≥10 … 5 MΩ x cm	≥10 … 5 MΩ x cm	≥10 … 5 MΩ x cm
Grade 2 water conductivity at 25 °C	≤0.1 … 0.2 µS/cm	≤0.1 … 0.2 µS/cm	≤0.1 … 0.2 µS/cm	≤0.1 … 0.2 µS/cm
TOC level	< 30 ppb	< 30 ppb	< 30 ppb	< 30 ppb
Particles >0.22 μm	< 1/mL	< 1/mL	< 1/mL	< 1/mL
Nominal flow, pure water (to storage tank)	5 L/h	10 L/h	15 L/h	10 L/h
Dimensions (WxDxH), cm	353954 cm	353954 cm	353954 cm	353954 cm
System weight, kg	16 kg	16 kg	16 kg	13.5 kg
Operating weight, kg	18 kg	18 kg	18 kg	15.5 kg

Applications

Application Description

Water for general laboratory applications and inorganic analytical methods (Type 2)