Sintering Furnace

Cat. No.	Dimensions (WxDxH)	Specification	Unit	Price	Quantity
DF01556174-01	422×320(430)×(430 + 230) mm³	Tmax in °C: 1300	Each	Inquiry

Product Description

Product Description

The sintering furnace LT 02/13 CR is perfectly suited for sintering of cobalt-chromium restorations. The blanks are placed in a special sintering bell and will be heat-treated under argon. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption. The system is open and can be programmed for various materials up to sintering temperatures of 1280 °C. Two pre-installed sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.

Features

· Tmax 1300°C
· Working temperature up to 1280 °C, depending on the CoCr material
· Single-phase connection
· Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
· Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as "refractory ceramic fiber" (RCF), which is classified and possibly carcinogenic, is not used
· Gas supply system with 2 solenoid valves and 2 flow meter
· Forced cooling system with compressed air possible
· Sintering bell with good sealing for sintering up to 30 single crowns under argon
· Sintering pearls, Ø 1,25 mm (200 g) included in delivery scope
· Special tongs included in the delivery scope
· Type S thermocouple
· Freely programmable controller C550 allows for automatic temperature control and switching of the gas flow
· Switching system with solid-state-relays to switch the heating
· Possibility to set two gas quantities for optimal adjustment to the sintering process
· Controller with touch operation C550 (10 programs with each 20 segments)
· MyNabertherm App for online monitoring of the firing on mobile devices for free download
· Freeware NTEdit for convenient program input via ExcelTM for MS WindowsTM on the PC
· Freeware NTGraph for evaluation and documentation of firings using ExcelTM for MS WindowsTM on the PC
· NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
· Defined application within the constraints of the operating instructions

Specifications

Model	Tmax	Inner dimensions in mm			Volume	Maximum	Outer dimensions in mm⁵			Process flush rate	Connected	Electrical	Weight	Heating time
	in °C	w	d	h	in l	units	W	D	H¹	l/min	load in kW	connection²	in kg	in min⁴
LT 02/13 CR	1300	130	120	120	1,9	30	422	320 (430³)	430 + 230	1.0	2.2	1-phase	25	35
¹Including opened lift door ²These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE ³Including compressed air connection for forced cooling ⁴Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE) ⁵External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.

Applications

Application Description

For cobalt-chromium