REPP Polypropylene Pre-filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504364-01	Membrane: Polypropylene (PP)	each	Inquiry

Product Description

Product Description

Quality:
· 100% Integrity testing in manufacturing
· Each filter is fully traceable with unique serial number
· Manufactured in a facility which adheres to ISO 9001:2015 Practices

Features

· High dirt holding capacity, long service life, economical and practical
· Ultra-high particle interception efficiency, good protection of the terminal sterilization filter element
· Excellent chemical compatibility

Specifications

Materials of Construction

Membrane	Polypropylene (PP)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Filtration Area

Outer Diameter	Removal Rating	Area/10'
68mm	1.0 μm	0.19 m²
68mm	1.5 μm	0.19 m²
68mm	3.0 μm	0.19 m²
68mm	5.0 μm	0.19 m²

Particle Retention

Retention Rates of Each Particle Size（%）
REPP	1.0 μm	1.5 μm	3.0 μm	5.0 μm	10 μm	20 μm	40 μm	70 μm
1.0 μm	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
1.5 μm	-	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
3.0 μm	-	-	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
5.0 μm	-	-	-	≥99.98	≥99.99	≥99.99	≥99.99	≥99.99

Sterilization

In-line steam sterilization

Up to 20 cycles (125°C for 30 minutes < 30 kPa per cycle).

Regulatory Compliance

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Removal Rating	End Cap	Nominal Length	Seal Material	行业
Blank 68mm	REPP	0100 1.0 µm	DOE Double Open End	05 5 inch	S Silicone	C
		0150 1.5 µm	HTF 222/Fin (PBT insert)	10 10 inch	E EPDM	P
		0300 3.0 µm	HSF 226/Fin (PBT insert)	20 20 inch	V Viton	F
		0500 5.0 µm	HTCG 222/Flat (PBT insert)	30 30 inch	P FEP/PFA encapsulated O-rings
			HSCG 226/Flat (PBT insert)	40 40 inch

*Example: REPP0100DOE05SC (REPP, 1.0µm, Double open end, 5 inch, Silicone, Industrial)

Applications

Application Description

Filtration of colloidal materials
Medium filtration
High viscosity material filtration
Fermentation broth filtration
Blood product prefiltration