HF150 Series High Flow Filter Cartridges

Cat. No.	Specification	Unit	Price	Quantity
FCM1504307-01	Filter Media: Pleated Polypropylene depth structure, Rein bonded glass fiber/Polyester support	each	Inquiry

Add to Cart

Product Description

Product Description

High Flow Filter is a large diameter, single open ended pleated cartridge filter. With a 6"/152mm diameter, large filtration area,and high flow rate up to 90m³/hr. It can be widely used in a wide variety of industry with less downtime for change-out.

Features

· High density pleated filter type resulting in a high filtration area,high flow rates, longer service life, and high dirt holding capacity.
· Multi-layered design provides gradient filtration.
· Internal PP core guarantees no distortion and resists higher reverse differential pressure.
· Ergonornically designed handle facilities fast and easy installation and remove without special tools.

Specifications

Materials of Construction

	Filter Media	Support/Drainage	End Caps	Core	Outside Material
PP	Pleated Polypropylene depth structure	Polypropylene	Glass filled polypropylene	Polypropylene	PP Cage (HFPP150 Series)
GF	Rein bonded glass fiber/Polyester support	Polyester	Glass filled polypropylene	Polypropylene	PET Net (HF150 Serise)

Recommended Operating Conditions

Max. Temperature	PP: 80°C GF: 121°C
Max. Pressure	0.40 Mpa/21°C HFPP150 (PP Cage) 0.38 MPa/21°C HF150 (PET Net) 0.15 MPa/80°C

Flow Rate

Length	Design Flow Rate	Max Flow Rate
20'	15 m³/h	30 m³/h
40'	30 m³/h	60 m³/h
60'	45 m³/h	90 m³/h
80'	60 m³/h	120 m³/h

Retention Ratings

Polypropylene (PP)	1.0, 2.0, 5.0, 10, 20, 40, 70, 90µm
Glass Fiber (GF)	0.8, 1.0, 3.0, 5.0, 15, 25µm

Retention Characteristic

Particle Size	Filtration Efficiency HF150NB
Particle Size	PP0.8	PP1.0	PP2.0	PP3.0	PP5.0	PP10.0	PP20.0
≥1μm	99.89%	99.82%	95.00%	86.97%	79.86%	42.23%	24.38%
≥2μm	99.97%	99.87%	98.64%	96.84%	90.09%	70.49%	40.09%
≥5μm	100.00%	99.93%	99.90%	98.86%	98.36%	82.26%	76.66%
≥8μm	100.00%	100.00%	99.97%	99.20%	98.88%	95.25%	82.60%
≥10μm	100.00%	100.00%	100.00%	99.58%	99.39%	98.18%	89.42%
≥12μm	100.00%	100.00%	100.00%	99.78%	99.57%	98.76%	97.41%
≥25μm	100.00%	100.00%	100.00%	100.00%	100.00%	99.34%	99.14%

Flow Rate Characteristics

Performance Comparison Table I

Performance Comparison Table II

Filters Quantities vs Same Filter Capacity

Change-Out Time

Reduce the number of filters by 90%,
Decrease the volume of housing by 50%,
Easier operation and change-out.

End Cap Configuration

Ordering Information:

Type	Filter Media	Efficiency Rating	Length	Seal
HFPP150 PP Cage	PP	0050 0.5µm	20 20 inch	S Silicone
HF150NB PET Net	GF	0080 0.8µm	40 40 inch	E EPDM
HFM150		0100 1.0µm	60 60 inch	V Viton
DSHF150		0200 2.0µm
G1HF150		0300 3.0µm
N1HF150		0500 5.0µm
N2HF150		1000 10µm
N3HF150		1500 15µm
N4HF150		2000 20µm
N5HF150		4000 40µm
JL-150		7000 70µm
		9000 90µm

*Example: HFPP150PP0050P20SC (HFPP150, PP, 0.5µm, 20 inch, Silicone)

Applications

Application Description

Industrial: Municipal Water, Pre-RO Filtration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate
Chemical: Quench Water, Aqueous Salt Solutions, Final Products
Petrochemicals: Water-flooding, Produced Water, Enhances Oil Recovery, Completion Fluids, Amine Sweetening, Finial Products
Electronics: Pre-RO Filtration, Process Water
Food & Beverage: Process Water
Pharmaceutical: Process Water