Depth Filters
| Cat. No. | Specification | Unit | Price | Quantity |
|---|---|---|---|---|
| FCM1518735-01 | Filtration Area (㎡): 0.002 | each | Inquiry |
|
| FCM1518735-02 | Filtration Area (㎡): 0.03 | each | Inquiry |
|
| FCM1518735-03 | Filtration Area (㎡): 0.25/0.5/1.0 | each | Inquiry |
|
| FCM1518735-04 | Filtration Area (㎡): 1.0/1.4/1.6 | each | Inquiry |
|
| FCM1518735-05 | Filtration Area (㎡): 2.1/3.4/3.8; 2.3 | each | Inquiry |
|
Product Description
Product Description
LeClafine series depth filters are cellulose-based filters developed for clarification applications in the biopharmaceutical and pharmaceutical industry. LeClafine series depth filters are composed of lignocellulose, inorganic filter aid and cationic resin, which have the advantages of high flow rate and large capacity.
Features
· Powerful fouling resistance capabilities
· Dual filtration mechanism with mechanical interception and charge adsorption, ensuring high impurity removal efficiency
· High throughput, rapid flow rates, increased loading capacity, and elevated protein recovery rates
· Significant clarification effect with low dissolution
· Various specifications available to meet research and development to commercial production needs
· Single-use design eliminates the need for cleaning validation
· Dual filtration mechanism with mechanical interception and charge adsorption, ensuring high impurity removal efficiency
· High throughput, rapid flow rates, increased loading capacity, and elevated protein recovery rates
· Significant clarification effect with low dissolution
· Various specifications available to meet research and development to commercial production needs
· Single-use design eliminates the need for cleaning validation
Specifications
| Item | Minicap | Midcap | Procap-P | 12 inch | 16 inch | |
|---|---|---|---|---|---|---|
| Filtration Area (㎡) | 0.002 | 0.03 | 0.25/0.5/1.0 | Single-layer filter plate | Single-layer filter plate | Double-layer filter plates |
| Inlet/Outlet | Luer | ¾" TC | 1.5" TC | Double Open End (DOE) | ||
| Gasket Material | —— | —— | ⸺ | Silicone rubber / EPDM rubber / Nitrile / Fluoroelastomer | ||
| High-pressure Steam Sterilization | 30 minutes at 126°C, 1 cycle | 30 minutes at 126°C, 3 cycles | ||||
| Maximum Operating Temperature | 40°C(104℉) | 80°C(208℉) | ||||
| Maximum Operating Pressure | 3.5 bar@40°C | ⸺ | ||||
| Maximum Forward Pressure Differential | 2.4 bar@40°C | |||||
| Biocompatibility | USP<88> | |||||
| Endotoxin | <0.25EU/ml, LAL test | |||||
| Height Dimensions (mm) | 71 | 106 | 69/96/148 | 192/258.5/275 | 192/258.5/275 | 258.5 |
| Diameter (mm) | 41 | 215 | 438 | 285 | 399 | |
| Dry Weight (kg) | 0.055 | 0.9 | 3.4/4.6/6.9 | / | / | / |
| Wet Weight (kg) | 0.067 | 1.1 | 4.6/7.2/11.0 | |||
| Minimum Backwash Volume (L) | 0.012 | 0.222 | 1.2/2.7/4.1 | |||
| Housing Material | Polypropylene + fiberglass | Polypropylene + fiberglass | Polypropylene + fiberglass | |||
| Recommended Flush Volume (L) | 0.1 | 1.5 | 12.5/25/50 | |||
| Recommended Flow Rate (L/min) | 0.01 | 0.15 | 1.25/2.5/5 | |||
Applications
Application Description
· Clarification filtration of cell harvest liquid for bacterial lysate.
· Prefiltration of material after viral inactivation for sterilization or prefiltration before removal of bacteria or viruses.
· Filtration of blood products to reduce impurities such as miscellaneous proteins or endotoxins.
· Removal of particles or colloids in other process steps.
· Prefiltration of material after viral inactivation for sterilization or prefiltration before removal of bacteria or viruses.
· Filtration of blood products to reduce impurities such as miscellaneous proteins or endotoxins.
· Removal of particles or colloids in other process steps.
Related Products
Online Inquiry
Note: If you don't receive our verification email, do the following:
- Confirm that you entered your email address correctly.
- Check if the email is in your spam or junk folder.
- Or you may contact us at
.
