CHIRALPAK® IE/SFC / CHIRALPAK® IE-3/SFC Polysaccharide-Based Chiral Columns

Cat. No.	Description	Specification	Unit	Price
CC02494738-01	CHIRALPAK® IE/SFC, SFC Analytical Column	4.6 mm×50 mm, 5 μm particle size	Each	Inquiry
CC02494738-02	CHIRALPAK® IE/SFC, SFC Analytical Column	4.6 mm×100 mm, 5 μm particle size	Each	Inquiry
CC02494738-03	CHIRALPAK® IE/SFC, SFC Semi-preparative Column	10 mm×250 mm, 5 μm particle size	Each	Inquiry
CC02494738-04	CHIRALPAK® IE/SFC, SFC Semi-preparative Column	20 mm×250 mm, 5 μm particle size	Each	Inquiry
CC02494738-05	CHIRALPAK® IE/SFC, SFC Semi-preparative Column	30 mm×250 mm, 5 μm particle size	Each	Inquiry
CC02494738-06	CHIRALPAK® IE/SFC, Preparative Column	50 mm×250 mm, 5 μm particle size	Each	Inquiry
CC02494738-07	CHIRALPAK® IE-3/SFC, SFC Analytical Column	3.0 mm×50 mm, 3 μm particle size	Each	Inquiry
CC02494738-08	CHIRALPAK® IE-3/SFC, SFC Analytical Column	3.0 mm×100 mm, 3 μm particle size	Each	Inquiry
CC02494738-09	CHIRALPAK® IE-3/SFC, SFC Analytical Column	3.0 mm×150 mm, 3 μm particle size	Each	Inquiry

Product Description

Product Description

Amylose tris(3,5-dichlorophenylcarbamate) immobilized to silica gel

CHIRALPAK® IE/SFC and CHIRALPAK® IE-3/SFC are solvent-resistant chiral columns with the surface of the silica gel bonded to amylose tris(3,5-dichlorophenylcarbamate).

Solvents that may be used such as:
main mobile phase: CO2; auxiliary solvent: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H2O, IPA, MeOH (accounting for no more than 30%)

Features

Supercritical Fluid Chromatography (SFC)
When a material is in a state that the temperature and the pressure exceed the critical point, it becomes a supercritical fluid. In this phase, the density of gas and liquid becomes same. Super critical fluid is a special phase which has either gas and liquid character but different from these.

Low viscosity : Quick separation with low pressure drop
High diffusivity : High unit productivity
Low solvent consumption : Environmental friendly. CO2 can be recycled.
Acidic behavior of CO2 : No additive such as TFA is required.

Specifications

Applicable mode: SFC
Particle size: CHIRALPAK® IE/SFC: 5μm; CHIRALPAK® IE-3/SFC: 3μm
Pressure: CHIRALPAK® IE/SFC, CHIRALPAK® IE-3/SFC: pressure should be maintained <30MPa; CHIRALPAK® IE/SFC (30mm ID) semi-preparative column: pressure should be maintained <29MPa; CHIRALPAK® IE/SFC (50mm ID) preparative column: pressure should be maintained <20MPa
Storage solvent: CHIRALPAK® IE/SFC: Ethanol=100%; CHIRALPAK® IE-3/SFC: Methanol=100%