APSEA Sterilizing-Grade Liquid Filter

Cat. No.	Specification	Unit	Price	Quantity
FCM1504293-01	Membrane: Hydrophilic polyethersulfone (PES)	each	Inquiry

Cat. No.

Specification

Unit

Price

Quantity

FCM1504293-01

Membrane: Hydrophilic polyethersulfone (PES)

each

Specifications

Membrane	Hydrophilic polyethersulfone (PES)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Model	Content
APSEA 0.22 μm	LRV/cm² ＞6 for 10⁷ cfu/cm² Brevundimonas diminuta（ATCC 19146）
APSEA 0.45 μm	LRV/cm² ＞6 for 10⁷ cfu/cm² Serratia marcescens (ATCC 14756)

In-line steam sterilization	Up to 100 cycles (135°C for 30 min and differential pressure < 30 kPa per cycle)
Autoclave	Up to 200 cycles (130°C for 30 min per cycle)

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a' Non-fiber-releasing filter' as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

Ordering Information:

Outer Diameter	Type	Membrane Pore Size	End Cap	Nominal Length	Seal Material	Industry
69mm	APSEA	0022 0.22 µm	DOE 平压	05 5英寸	S Silicone	P
		0045 0.45 µm	HTF 222/尖头式	10 10英寸	E EPDM
		0065 0.65 µm	HSF 226/尖头式	20 20英寸	V Viton
		0080 0.8 µm	HTCG 222/平头式	30 30英寸	P FEP/PFA encapsulated O-rings
		0100 1.0 µm	HSCG 226/平头式	40 40英寸
		0120 1.2 µm
		0300 3.0 µm
		0500 5.0 µm
		0800 8.0µm
		1000 10.0µm

* Example: APSEA0022DOE05SP (APSEA, 0.22µm, Double open end, 5 inch, Silicone, Pharmaceutical)