AlphaSat® with Vectra® Alpha® 10 Pre-Wetted Cleanroom Wipers, Sterile

AlphaSat® with Vectra® Alpha® 10 sterile pre-wetted cleanroom wipers are made from 100% polyester with a sealed-border, processed on the automated Vectra® cleaning system providing low levels of ions, NVRs (non-volatile residues), particles, and fibers for use in critical cleaning applications and environments.

Automated Vectra® cleaning system advances the cleaning process and brings this technology to a higher level of wiper manufacturing. These low linting wipers are designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.

TX3280 product is pre-wetted with 0.2 µm filtered USP-Grade 70% IPA / 30% Water for Injection (WFI).
TX3285 product is pre-wetted with 0.2 µm filtered USP-Grade 70% IPA / 30% DIW.

Products are gamma-irradiated and sterile validated to a Sterility Assurance Level of 10⁻⁶ according to AAMI Guidelines. Tested for endotoxins.

· Packaged in easy-to-use, peel-and-reseal bags, reducing solution evaporation that preserves the consistent wiper wetness level.
· Provide consistent, optimized cleaning efficiency with repeatable wetness and VOC levels.

· Wiping and cleaning surfaces, equipment and parts.
· Applying and removing lubricants, adhesives, residues and other solutions including disinfectants.
· Cleaning with solvents such as isopropyl alcohol (IPA), ethanol, acetone, and degreasers.
· Lining trays for holding, protecting, drying and storing of parts, equipment and devices.
· Appropriate for use with temperatures less than 400°F (205°C).