4ft. width 10" opening NSF Certified Class II A2 Biosafety Cabinet

A biosafety cabinet, also called a biological safety cabinet or microbiological safety cabinet—is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level.

· Motorized front window.
· Large LCD display, all information displayed.
· Automatic air speed adjustable with filter block.
· With memory function in case of power-failure.
· Side & back wall is made up of single piece stainless steel.
· Interlock function: UV lamp and front window; UV lamp and blower, fluorescent lamp; Blower and front window.
· Front 10° slanted to offer operator comfort while working for long time, reduce glare and maximize reach into the work area.

Caution! Installation requires a forklift or a crane.
Attention! Steps before and after using the unit.
· Step 1: Fully close the front glass panel, turn on UV light for 30 mins (you can use the timer setting). Users should leave the room during this disinfection period.
· Step 2. Raise the glass panel to recommended opening height, turn on air circulation for 10 minutes.
· After operation is done, fully close the glass panel, turn on UV light for another 30 minutes, then turn off the unit.
Important Guidelines using a biosafety cabinet
· No flammable and explosive substances (Building up of flammable material may cause an internal fire or explosion)
· No volatile chemicals (May cause damage to HEPA filters to the point where it allows particles to leak through)
· No toxic chemicals or materials (May reach room occupants)
· No open flame (Will disrupts air flow patterns)
· Minimal use (10mL or less) of decontaminant, such as 70% isopropyl or ethyl alcohol is allowed.
· We recommend using the following for disinfecting the surfaces of a BSC, depending on the agent to be controlled: Sodium hypochlorite (bleach), Ilodophors (Wescodyne), Phenolics (Hilphene, Vespene) and Quaternary ammonium compounds (Conflikt, EndbacII)
If gaseous, vaporized or aerosolized chemicals must be generated in a BSC, you should assure yourself that the quantity being generated will NOT cause a flammable or toxic risk