3ft. width 8" opening EN Certified Class II A2 Biosafety Cabinet

Cat. No. Dimensions (WxDxH) Specification Package Unit Price Quantity
BC01503762-01 1087×775×2265 mm 99.995% efficiency at 0.3μm 1240×1060×1900 mm EA $3,840

Add to Cart

Product Description
Product Description
A biosafety cabinet, also called a biological safety cabinet or microbiological safety cabinet—is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level.
Features
· Motorized front window.
· Large LCD display, all information displayed.
· Automatic air speed adjustable with filter block.
· With memory function in case of power-failure.
· Side & back wall is made up of single piece stainless steel.
· Interlock function: UV lamp and front window; UV lamp and blower, fluorescent lamp; Blower and front window.
· Front 10° slanted to offer operator comfort while working for long time, reduce glare and maximize reach into the work area.
Product Details
Accessory

 Part description

 Quantity

3 Ft Biosafety Cabinet with base stand

1 pc

Remote

1 pc

Bottom drain port assembly

1 set

Backup UV light tube

1 pc 

Hex wrench

1 pc

Front glass panel motor adjusting   tool, plastic

1 pc

Fuse (for glass panel control board)

5 pcs

Hex bolt

 5 pcs

Big, small washer and lock washer

4 sets

User's manual and Test report

1 set

Note
Caution! Installation requires a forklift or a crane.
Attention! Steps before and after using the unit.
· Step 1: Fully close the front glass panel, turn on UV light for 30 mins (you can use the timer setting). Users should leave the room during this disinfection period.
· Step 2. Raise the glass panel to recommended opening height, turn on air circulation for 10 minutes.
· After operation is done, fully close the glass panel, turn on UV light for another 30 minutes, then turn off the unit.
Important Guidelines using a biosafety cabinet
· No flammable and explosive substances (Building up of flammable material may cause an internal fire or explosion)
· No volatile chemicals (May cause damage to HEPA filters to the point where it allows particles to leak through)
· No toxic chemicals or materials (May reach room occupants)
· No open flame (Will disrupts air flow patterns)
· Minimal use (10mL or less) of decontaminant, such as 70% isopropyl or ethyl alcohol is allowed.
· We recommend using the following for disinfecting the surfaces of a BSC, depending on the agent to be controlled: Sodium hypochlorite (bleach), Ilodophors (Wescodyne), Phenolics (Hilphene, Vespene) and Quaternary ammonium compounds (Conflikt, EndbacII)
If gaseous, vaporized or aerosolized chemicals must be generated in a BSC, you should assure yourself that the quantity being generated will NOT cause a flammable or toxic risk
Specifications

Model

BSC-3FA2-GL

External Size(W×D×H)

Internal Size(W×D×H)

1087×775×2265mm

910×600×660mm

Work Surface

Height

Max Opening

Tested Opening

750mm with optional base stand

520mm(20.5")

Safety height 254mm (10")

Airflow Volume

Inflow

441m3/h(259cfm)

Down flow

60%:649m3/h(382cfm)

Exhaust

40%:445m3/h(259cfm)

Front Window

HEPA Filter

Motorized. Two-layer laminated toughened glass ≥5mm. Anti UV

Two, 99.995% efficiency at 0.3μm, filter life indicator

Filter Guard Type

Noise

Aluminum alloy frame , glass filter paper

NSF 49≤67 dB/EN 12469≤65 dB

Illumination

Display

≥1000Lux

LCD Display

Waterproof Socket

Tap

Ground Resistance

2, Total consumption:≤500W

Water tap×1, Gas tap ×1

≤ 0.10Ω

Power Supply

AC220V±10%, 50/60Hz; 110V±10%, 60Hz, Full load Amps: 9A, BTU/Hr: 1689

Consumption

400W

Alarm

DC Motor

Abnormal airflow velocity; Filter replacement; Front window at unsafe height.

One ECM motor, 110V& 220V acceptable, Speed adjustable, high efficiency and

low power consumption

Material

Working area: 304stainless steel

Frame and Decorative Plate: cold-rolled steel with anti-bacteria power coating

UV Lamp

20W

Germicidal UV lamp, Emission of 253.7 nanometers for most efficient decontamination

Illuminating Lamp

10W×2

LED lamp

Standard Accessory

Illuminating lamp, UV lamp ×2, Base stand, SS water & gas taps, Drain valve,

Waterproof sockets, Stainless Steel I.V. Bar with 10 hooks

Optional Accessory

Armrest, Airflow tester, Formalin fumigation sterilizer, Infrared sterilizer,

Electric height adjustable base stand, Remote control

Package Size

(W×D×H)

Gross Weight

1240×1060×1900mm

270kg

Related Products

Online Inquiry

Note: If you don't receive our verification email, do the following:

GET IN TOUCH
7x24

Seamless access to cutting-edge products and services with our professional support.

Copyright © Amerigo Scientific. All rights reserved.