| Cat. No. | Specification | Unit | Price | Quantity |
|---|---|---|---|---|
| FCM1504304-01 | Membrane: Polypropylene (PP) / Polyethersulfone (PES) / Polytetrafluoroethylene (PTFE) | each | Inquiry |
|
| Membrane | Polypropylene (PP) Polyethersulfone (PES) Polytetrafluoroethylene (PTFE) |
| Core/End Cap/Cage | Polypropylene (PP) |
| Distribution Layer | Polypropylene (PP) |
| O-ring | See ordering form |
| Effective Filtration Area | PP 0.76 m² PES 2.0 m² PTFE 2.5 m² |
| Max. Operating Temperature | 80°C |
| Max. Operating Pressure | 0.69 MPa@25°C 0.24 MPa@80°C |
| PP | 0.2μm, 0.6μm, 1.0μm, 2.0μm, 5.0μm, 10μm, 20μm, 40μm |
| PES | 0.1μm, 0.22μm, 0.45μm, 0.65μm, 1.2μm |
| PTFE | 0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm |
| Housing Body | 316L, 304 Stainless steel, PP |
| Clamp | 304 Stainless steel |
| O-ring | EPDM/Silicone/Viton/PTFE |
| Surface Finish | Body surface mechanical polishing, inner side＜0.4μm |
| Drain | 1/4'NPT |
| End Cap | 334 |
| Inlet/Outlet | Flange or TC |
| Body Connection | Flange or TC |
| Max. Operating Pressure | 0.6MPa or 1.0MPa |
| Type | Membrane | Removal Ratings | End Cap | Industry |
| 130 | PP PP | 0010 0.1µm | U EPDM(U-CUP) | P |
| APSL APSL | 0022 0.22µm | UN NBR(U-CUP) | ||
| PF PTFE | 0045 0.45µm | O EPDM(O-ring) | ||
| LHPF LHPF | 0065 0.65µm | V Viton(O-ring) | ||
| 0100 1.0µm | P PFA/ Viton(O-ring) | |||
| 0300 3.0µm | ||||
| 0500 5.0µm | ||||
| 1000 10µm | ||||
| 2000 20µm | ||||
| 3000 30µm | ||||
| 4000 40µm |
| Type | Material | Length | Inlet/Outlet | Pressure | Seal Material | Industry |
| H-130 | A SS304 | 10 10 inch | T TC | P 0.6 MPa | U EPDM(U-CUP) | P |
| B SS316L | F Flange | G 1.0 MPa | UN NBR(U-CUP) | |||
| N Thread | F 1.6 MPa | O EPDM(O-ring) | ||||
| V Viton(O-ring) | ||||||
| P PFA/ Viton(O-ring) |
Note: If you don't receive our verification email, do the following:
.
Seamless access to cutting-edge products and services with our professional support.
