VOLTAGE CONTROLLER, 0-120V at 10 Amps

Variable control from zero output to 95% line voltage. A voltage limit rear mounted center-off switch is used to select a 40v or 120v maximum output with the control knob on. 0-10 amp meter 5% accuracy F.S. NOT recommended for heaters rated less than 120 volts. Warning glow light mounted next to correcting switch lights when dangerous reversed wiring condition exists. Easy access 10 amp fuse Type 3 AG (rear mounted). Standard 3-wire power cord (grounded to case). Input 120 volts, 50/60Hz (slightly less output at 50Hz).