UV-Vis-NIR Spectroscopy Accessories For Constant-Temperature Measurement

• CPS-100 6-Cell Thermoelectrically Temperature-Controlled Cell Positioner
These six-cell positioners permit measurement of up to six sample cells under constant-temperature conditions. When used in the kinetics mode, a system can be configured to measure enzyme activity in up to six samples maintained at a constant temperature.

• TCC-100 Thermoelectrically Temperature Controlled Cell Holder
An easy-to-use constant-temperature cell holder that uses a Peltier element for electronic cooling. It does not require an external thermostatic bath or water for cooling.

• Constant-Temperature Cell Holder
This holder holds the sample cell at the desired, uniform temperature by circulating constant-temperature water. It accepts a pair of 10 mm square cells.

• S-1700 Thermoelectric Single Cell Holder
This cell holder enables setting of the temperature program to raise and lower the sample cell temperature. The thermoelectric system enables the sample temperature to be controlled between 0 and 110°C. A stirrer is also provided to ensure uniform temperature distribution throughout the cell.
Cooling water temperature: 20±2°C
Flow rate: 4.8 L/min or more
*Cells are not provided.

• NTT-2200P Constant-Temperature Water Circulator
This accessory circulates temperature-controlled water to a constant-temperature cell holder.
Temperature control range: 35 to 80°C
(ambient +5 to +80°C at room temperature 30°C or more)
Temperature control precision: ±0.05°C or more
Max. pump circulation rate: 27/31 L/min
Max. pump head: 9.5/13 m (50/60 Hz)
External circulation nozzle: 10.5 mm O.D. (both outlet and return)
Tank capacity: Approx. 10 L (9 L during operation)
Standard accessories: Lid with handles, hose 4 m (I.D. 8 mm dia., O.D. 12 mm dia.), 4 hose clamps, Instruction Manual
Size: 270 W x 560 H x 400 D (mm)
Power requirements: 100 VAC, 1250 VA, with 1.7 m power cable and grounded plug