Tap water systems Q-FRONT 5 Trace, for inorganic trace analysis and RO water

Reliable operation
Low running cost
Convenient user interface
Integrated flexible dispenser
Easy installation and maintenance

Cat. No.	Description	Dimensions (WxDxH)	Specification	Unit	Price
WPS1401621-01	Storage tank required, but not included	35x39x54 cm	Nominal water flow: 5L/h	EA	$2,532
WPS1401621-02	Including storage tank (water storage tank "Pro", part no. 11015)	35x39x54 cm	Nominal water flow: 5L/h	EA	$2,883
WPS1401621-03	Including water storage tank "Pro", external prefilter, AquaStop and CO2 tank filter	35x39x54 cm	Nominal water flow: 5L/h	EA	$3,367
WPS1401621-04	Including water storage tank "Pro", external prefilter, AquaStop, CO2 tank filter and automatic sanitization module for tank	35x39x54 cm	Nominal water flow: 5L/h	EA	$3,787

Add to Cart

Product Description

Product Description

Q-Front is an excellent choice for your laboratory, providing both Grade 1 and RO water directly from tap water.
Q-Front 5/10 are ultrapure water systems where water deionization and polishing are provided by one ion exchange cartridge. It simplifies servicing of the system and decreases the unit cost. RO permeate water is stored in the tank and delivered to polishing loop by the pump.
Grade 1 water can be dispensed by attached dispenser, including volumetric dispensing.
All well-known Grade 1 systems configurations – Trace, HPLC and Bio are available to meet the specific needs of every laboratory and application.

Product Details

Weight

System weight: 25kg
Operating weight: 28kg

Accessory

1. Water dispensing unit "Flow Point 3"
Designed for ultrapure (Grade 1) water dispense
Adjustable in all dimensions
Manual and/or volumetric dispensing
Color graphic LCD display
Full remote control for water purification system
Compatible with Q-Front, Q-Front N, Onsite+, Integrity+ and Connect systems
Dimensions (W*D*H): 40*22*70 cm
2. Universal remote dispenser
With 3 m supply hose w/ fixed stand w/o controller, suitable for any pressurized water system storing Pure (Grade 2) or RO water.
3. Water distribution module
4. Upcharge for water storage tank "Comfort"
W/ base, tap and multi-point level sensor, 60L, for ultrapure water systems.
Dimensions: 42*42*85 cm
5. Upcharge for storage tank "Comfort"
W/ base, tap and level switch, 100L, for ultrapure water systems.
Dimensions: 45*45*112 cm
6. Upcharge for storage tank "Comfort"
W/ level switch, 200L, w/ base, for ultrapure water systems.
Dimensions: 55*55*134 cm
7. UV sterilization module 24V
8. External pre-filter set (carbonpp/ PP 1μm) with manometer
Compatible withall tap water systems.
9. External pre-filter set (polyphosphate/carbonpp/1μm) with manometer
10. External input pressure reducer
For tap water systems.
11. Tank CO2 trap with microfilter
12. Automatic sanitization module for tank
13. Air filter for storage tank
14. 0.22μm bacteria air filter for storage tank
15. AquaStop
Water leakage protection system.
16. Sanitization cartridge
17. DQ/IQ/OQ/PQ documentation

Note

FEED WATER REQUIREMENTS:
Feed water: Potable tap water
Pressure: 0.4-6.0bar
Conductivity: <2000μS/cm
Temperature: 5-35°C
If the feed water does not meet specifications, additional pre-treatment solutions are available.

Specifications

Parameters	Trace	HPLC	Bio
Grade 1 water resistivity at 25 °C	18.2 MΩ x cm	18.2 MΩ x cm	18.2 MΩ x cm
Grade 1 water conductivity at 25°C	0.055 μS/cm	0.055 μS/cm	0.055 μS/cm
TOC level	< 10 ppb	< 5 ppb*	< 5 ppb*
Rnase	-	-	< 0.01 ng/mL
Dnase	-	-	< 4 pg/mL
Bacteria	< 0.01 CFU/mL	< 0.01 CFU/mL	< 0.01 CFU/mL
Endotoxins	< 0.15 EU/mL	< 0.15 EU/mL	< 0.001 EU/mL
Particles >0.22 μm	< 1/mL	< 1/mL	< 0.05/mL
Nominal flow, pure water (to storage tank)	5 / 10 L/h	5 / 10 L/h	5 / 10 L/h
Dispense rate, ultrapure water	1.5–2 L/min	1.5–2 L/min	1.5–2 L/min
Dimensions (WxDxH), cm	35x39x54	35x39x54	35x39x54
System weight, kg	25	26	27
Operating weight, kg	28	29	30

Applications

Application Description

Ultrapure (Type 1) water for inorganic trace analysis and RO water