SaiPress® Sterilizing-grade Hydrophilic Cartridge Filter

Cat. No.	Specification	Unit	Price
FCM1530428-01	Filter Size: 10inch, In&Out Type: Up-in and down-out (In line), Connector Type (In/Out): TC50 at both ends	1 per package	Inquiry
FCM1530428-02	Filter Size: 10inch, In&Out Type: Up-in and down-out (In line), Connector Type (In/Out): 5/8 hose at both ends	1 per package	Inquiry
FCM1530428-03	Filter Size: 10inch, In&Out Type: Up-in and down-out (In line), Connector Type (In/Out): inlet TC50, outlet 5/8 hose	1 per package	Inquiry
FCM1530428-04	Filter Size: 10inch, In&Out Type: Left-in and right-out (T line, only TC50), Connector Type (In/Out): TC50 at both ends	1 per package	Inquiry
FCM1530428-05	Filter Size: 10inch, In&Out Type: Left-in and right-out (T line, only TC50), Connector Type (In/Out): 5/8 hose at both ends	1 per package	Inquiry
FCM1530428-06	Filter Size: 10inch, In&Out Type: Left-in and right-out (T line, only TC50), Connector Type (In/Out): inlet TC50, outlet 5/8 hose	1 per package	Inquiry

Add to Cart

Product Description

Product Description

Product Features
• Sterilizing-grade polyether sulfone (PES) material, can withstand mul- tiple autoclaves
• Higher flow rates at the same level, thus reducing the process footprint and maximizing benefits
• Ready-to-use models for gamma irradiation Good chemical compatibility for pH1-14
• A full line of products is available for process reduction and scale-up

Filter application
• Buffer, pH regulator filtration
• Process additives and intermediates filtration
• Chemical synthetic medium filtration
• Water-based feed filtration

Available Membrane Pore Size
• Single layer: 0.1μm/0.22μm/0.45μm/0.65μm/0.8μm/1.2μm
• Double layer: 0.22+0.1μm/0.45+0.1μm/0.45+0.22μm/0.65+0.22μm/0.8+0.22μm/1.2+0.22μm/0.8+0.45μm/1.2+0.45μm

Available Sterilization Form:
• Gamma irradiated (Sterilized packaging)
• Autoclavable
• Gamma sterilizable

More Details

SaiPress® Sterilizing-grade Hydrophilic Filters

Product Details

Product Type

Sterilization Filtration Solution

Specifications

TOC and conductivity: The detected TOC value is ≤0.5mg/L, and the electrical conductivity value is ≤1.3us/cm
Cleanliness: Meets the "no fiber release" filter standard as defined in 21 FR210.3 (b) (6)
Bacterial endotoxin: The endotoxin content of the filter solution was determined, and the content of endotoxin in the filter solution was lower than 0.25EU/ml
Biosafety testing: All materials of the filter cartridge conform to USP < 88 >, in vivo biosafety evaluation of ClassVI plastic products and in vitro biosafety test of USP < 87 >
Bacterial retention: The test method of ASTMF838 and defective Pseudomonas (ATCC19146) were used for bacterial retention of this product. The results showed that the minimum retention rate was 10⁷cfu/cm²
Regulatory compliance: Product production and quality management in accordance with ISO: 9001 (2015)
Shelf life: 3 years
Storage and transportation: This product should be stored in an environment of 0 to 30°C, avoiding freezing and high tempera- ture (>40°C) conditions. The internal bag should be kept intact to prevent external particles or moisture from entering