SaiClear® Depth Filter , P17/20 Filter Material

Cat. No. Specification Unit Price Quantity
FCM1530422-01 P17 Filter material, 23cm² Filtration area Each Inquiry
FCM1530422-02 P17 Filter material, 100cm² Filtration area Each Inquiry
FCM1530422-03 P17 Filter material, 250cm² Filtration area Each Inquiry
FCM1530422-04 P17 Filter material, 480cm² Filtration area Each Inquiry
FCM1530422-05 P17 Filter material, 1000cm² Filtration area Each Inquiry
FCM1530422-06 P17 Filter material, 0.45m² Filtration area Each Inquiry
FCM1530422-07 P17 Filter material, 0.9m² Filtration area Each Inquiry
FCM1530422-08 P20 Filter material, 23cm² Filtration area Each Inquiry
FCM1530422-09 P20 Filter material, 100cm² Filtration area Each Inquiry
FCM1530422-10 P20 Filter material, 250cm² Filtration area Each Inquiry
FCM1530422-11 P20 Filter material, 480cm² Filtration area Each Inquiry
FCM1530422-12 P20 Filter material, 1000cm² Filtration area Each Inquiry
FCM1530422-13 P20 Filter material, 0.45m² Filtration area Each Inquiry
FCM1530422-14 P20 Filter material, 0.9m² Filtration area Each Inquiry

Add to Cart

Product Description
Product Description
Depth Filter is commonly used for pre-filtration, such as fermentation fluid clarification, removal of cell debris and DNA, preconditioning in plasma products and other biological products.
SaiClear® Depth Filter, developed for demanding clarification applications in the biotechnology and pharmaceuti- cal industries, significantly reduce the difficulty of downstream purification.

Product features
• With diatomaceous earth and cellulose as membrane materials, it has a high contaminant capacity
• Higher impurity removal capacity through mechanical interception and electrostatic adsorption
• Combine multiple clarification steps into one device to optimize the clarification process
• A full line of products is available for process reduction and scale-up

SaiClear® P Series and S Series depth filters have been developed to meet different process requirements. The filter medium inside the filter is the same as the filter medium in the traditional depth filter system, and there are many choices of accuracy and models. In addition, SaiClear® has a small footprint, saving clean room space. Compared to traditional depth filtration systems, the SaiClear® installation position is flexible and easy to operate for process development.

Available Connection Type:
• S Type: TC25 at both ends
• T Type: TC50 at both ends
• L Type: Luer at both ends (only 23cm²)
Product Details
Product Type
Depth Filtration Solution
Specifications
Membrane material: Diatomaceous earth, cellulose
Housing material: Polypropylene
Integrity test: No gas leakage, aerosol permeability meets the requirements
Pressure test: 25°C water bath, maintain 50psi pressure for 24 hours, filter no gas leakage 40°C water bath, maintain 40psi pressure for 24 hours, filter no gas leakage
Hydraulic stress test: Rinse the filter at 40psi for 30 minutes and repeat this cycle four times before the filter passes the integrity test
TOC: TOC value ≤6mg/L (After rinsing with 100L/m2 volume of purified water, sample the filtrate. )
Conductivity: Conductivity value ≤15μS/cm (After rinsing with 100L/m2 volume of purified water, sample the filtrate. )
Bacterial endotoxin: The content of endotoxin in the filtrate was less than 0.25EU/mL
Biosafety testing: The materials used meet USP <87> and USP <88> biosafety requirements
Related Products

Online Inquiry

Note: If you don't receive our verification email, do the following:

GET IN TOUCH
7x24

Seamless access to cutting-edge products and services with our professional support.

Copyright © Amerigo Scientific. All rights reserved.