PSSF Pleated Stainless Steel Felt Cartridges

Cat. No.	Specification	Unit	Price	Quantity
FCM1504322-01	Filter Media: 316L Stainless Steel Felt	each	Inquiry

Product Description

Product Description

PSSF Stainless Steel Pleated Felt Filter Cartridges are composed of stainless steel sintered felt shaped during the pleating process. These filters have a large filtration area with high flow rates and low pressure drops. The unique stainless steel sintered felt is made from stainless steel fibers which have been sintered to form a high porous depth filtration material. PSSF Filter Cartridges features include a graded pore size from coarse (upstream) to fine (downstream), which results in a higher dirt holding capacity with excellent filtration efficiency and longer service life. These filters are widely used in steam filtration or liquids with high viscosities, e.g. sugars and syrups.

Features

· Absolute-rated
· All stainless steel construction excellent chemical compatibility
· Excellent chemical compatibility and high temperature resistance
· Specialized alloy for high corrosion and oxidation resistance
· Corrosive and oxidation resistant
· High dirt holding capacity and long service life

Specifications

Material of Construction

Filter Media	316L Stainless Steel Felt
Cage/Support	316L Stainless Steel
Core/End Caps	316L Stainless Stee

Operating Conditions

Recommended Continuous Operating Temperature Range	-75°C to +200°C Note: Temperature dependant on o-ring compound
Max. Differential Pressure	5.0 bar / 21°C (forward flow) 2.0 bar / 21°C (reverse flow)
Hot Water Sterilization	85°C/30min @ Max. Differential Pressure of 2bar
Cleaning Solution	Reverse Rinse by Pure Water/Compressed Air @ ≤2bar; Ultrasonic Rinsing
Effective Filtration Area	0.12m² / 10inch

Parameters

Removal Rating in Liquid μm	Removal Rating in GAs μm	Pore Efficiency %	Dirt Holding Capacity mg/cm²	Average Air Pemeability① L/dm²min	Flow Rate② m³/h
3.0③	0.5	70%	7.9	10	0.8
5.0	1.0	75%	5.0	47	1.3
7.0	1.5	76%	6.5	63	1.6
10.0	2.0	75%	7.8	105	2.0
25.0	16	80%	19.0	355	2.5
40.0	25	-	-	-	-
60.0	45	-	-	-	-

①Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air
②Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar
③Bekaert Filtration Media

Retention Rates: PSSF v. TIC Titanium Filter

	PSSF	TIC Titanium Filter
Materia	SS Sintered Felt (no ber releasing)	Metal Powder Metal Powder (will release after long term use)
Strength	Pleated Structure High Temperature & Pressure Resistance	High Temperature (Sintered) Unstable Pressure
Retention Rates	Absolute-Rated EFA: up to 0.12m²	Depth Filter EFA: 0.056m²

Notes on Cleaning

Ultrasonic cleaning is recommended rather than back flush cleaning due to its depth and porous filtration media construction

Ordering Information:

Series	Removal Ratings	End Cap	Nominal Length	Diameter	Seal Material	Industry
PSSF	0200 2.0µm	DOE Double Open End	05 5 inch	D25 25mm	S Silicone	C
	0300 3.0µm	TC 222/Flat	10 10 inch	D30 30mm	E EPDM	F
	0500 5.0µm	TF 222/Fin	20 20 inch	D50 50mm	V Viton	P
	0700 7.0µm	SC 226/Flat	30 30 inch	D65 65mm	P PFA
	1000 10µm	SF 226/Fin	40 40 inch	D70 70mm	F PTFE
	2500 25µm	L Screw
	4000 40µm
	6000 60µm

*Example: PSSFW0200DOE05D65SF (PSSF, 2.0µm, Double open end, 5 inch, 25mm, silicone, Chemical)