PDMS Electric Cutting and Punching

The equipment can cut and punche holes for PDMS. The equipment has a thin film button to control the push rod motor to adjust the height. Through the punching needle and cutting blade installed on the push rod motor, the soft chips with vertical drilling and cutting can be realized such as PDMS.

Cat. No.	Dimensions (WxDxH)	Specification	Unit	Price	Quantity
MFSE528086-01	200 × 218 × 270 mm	Needle outer diameter specifications: 0.7/0.8/0.9/1.07/1.26/1.47/1.66/1.8/2.1/2.4/2.8/3.0/3.45/4 mm	Each	Inquiry

Add to Cart

Product Description

Product Description

The WH-CP-03 type electric cutting and punching machine is a device for cutting and punching PDMS. The device is controlled by the film button to control the height of the push rod motor, and the punching machine is installed on the push rod motor. Hole needles and cutting blades enable vertical drilling and cutting of soft chips such as PDMS. This product has the characteristics of labor saving, convenient operation, excellent punching and cutting effects.

Specifications

Needle outer diameter specifications: 0.7/0.8/0.9/1.07/1.26/1.47/1.66/1.8/2.1/2.4/2.8/3.0/3.45/4 mm
Thickness range of needle punching: <13 mm
Blade cutting size range: 100*100 mm
Blade cutting thickness range: <10 mm
Dimensions: 200(L)*218(W)*270(H) mm
Weight: 4kg
Working environment: temperature 0°C-40°C, relative humidity <80%.

Related Products

Cutting and Punching All-in-one Machine

Desktop Cutting Machine for PDMS (A5)

Hole Puncher and Cutting Machine for PDMS Chips

Online Inquiry

Note: If you don't receive our verification email, do the following:

Confirm that you entered your email address correctly.
Check if the email is in your spam or junk folder.
Or you may contact us at .

GET IN TOUCH

Seamless access to cutting-edge products and services with our professional support.