MM10 Series Peristaltic Pump, 0.001-120mL/min Flow, 1 Channel

Ultra-small volume, rotary card design, adjustable tube in 3 directions: up, down and side. Excellent flow stability and repeatability. High mechanical strength, excellent corrosion resistance and aging resistance.

▪MM10 pump head suitable for wall thickness 0.86-1mm, ID 0.5-3.2mm silicone tube, Pharmed, PVC, Viton etc. material tube, it can run continuously at the maximum flow rate 29.7mL/min at 100rpm, and interval operation, the maximum speed can reach 400rpm and the flow rate can reach 118.8mL/min.
▪The shell of pump head is made of PES material and the roller is made of PVDF material. It has excellent chemical corrosion resistance and high temperature resistance.
▪The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.
▪Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
▪Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
▪Small size, convenient installation and simple operation.
▪It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.

A. For longer tube lifetime, choose thicker wall tube and low speed.
B. For larger flow,choose larger ID tube and in high speed.
C. For higher precision, choose smaller ID tube and medium to high speed.
D. For higher suction and back pressure, choose thinner ID and thicker wall tube and low speed.