HolderHome-X1, Freezer (-20 °C to 0°C)

▪ HolderHome is easy to assemble and use. Simply store the core in a freezer at -80 °C or -20 °C for a few hours.
▪ Select the corresponding energy core and insert it into the base of HolderHome during use.
▪ Put the required BlockHome test tube module or freezer frame on the freezer core, and then insert your test tube or sample into the HolderHome.
▪ If dry ice is selected, take out the freezing core, fill 700ml~800ml directly in the original position of placing the freezing core, and then put the BlockHome test tube module on the dry ice.
▪ If the X,X1 freezing core is taken out in the -80°C environment, it can be placed at room temperature for 10 minutes before being inserted into the base, so as to eliminate the excessively low surface temperature.
▪ BlockHome test tube module or freezer box can be replaced at any time according to the needs to meet different needs.

Cat. No.	Specification	Unit	Price	Quantity
LRE1437785-01	Range: -20 °C to 0°C, Freezer core: X1 energy core, Module or freezer frame: optional, Holding time: up to 12 hours	Unit	$510

Cat. No.

Specification

Unit

Price

Quantity

LRE1437785-01

Range: -20 °C to 0°C, Freezer core: X1 energy core, Module or freezer frame: optional, Holding time: up to 12 hours

Unit

$510

Product Description

Product Description

The HolderHome is a slightly larger, addition-free freezer with two - or four-core options depending on usage. It can freeze products all day without ice, electricity and battery, and it is very flexible to use. Different temperature control can be achieved according to different energy cores. X type freezer core can freeze samples at 0°C to 4°C for more than 12 hours. X1 type freezer core can freeze samples at -20°C to 0°C for more than 12 hours. The X2 core can keep the sample at -22°C to -18°C for more than 5 hours. The selection of freezing module can meet the needs of different test tubes, and the selection of freezing frame can meet the needs of different bottles, bags, boxes and other samples. The HolderHome is very suitable for sample transportation, transfer and inconvenient use of ice and electricity freezing process.

Features

▪ Without ice, electricity and batteries can provide all-weather cooling or freezing for the sample.
▪ X, X1, X2 type freezing core can provide the required cold source to achieve the required temperature.
▪ You can choose freezing module or freezing frame, suitable for different test tubes and a variety of sample containers.
▪ High temperature uniformity and stability
▪ Easy to clean with alcohol
▪ Durable outer material will not absorb liquid, drop will not break, internal stability and strong, highly durable, protect the sample.
▪ Easy to operate, energy saving and environmental protection, suitable for frequent and repeated use