G3030-1S Industrial Syringe Pump, 1 Channel

Linear speed: 0.005mm/s~25mm/s
Running time: 1.2s~100min (Rated stroke)
Flow accuracy: error≤1% (Rated stroke)
Flow repeatability:CV≤0.05% (Rated stroke, 25°C Deionized water, 1mL syringe)
Power supply:DC 24V/1.5A
Syringe: 50μL/100μL/250μL/500μL/1mL/2.5mL/5mL
Rated stroke: 30mm
Control resolution: standard mode 3000 steps, microstep mode 24000 steps (rated stroke)
Syringe fitting: 1/4-28UNF inner thread
Syringe material: Borosilicate glass syringe, stainless steel push rod, PTFE piston
Piston drive: stepper motor, slide rail with lead screw drive, quadrature encoding detects lost steps
Reversing valve: standard: 120°3 port
Valve position time: ≤250millisecond (Between two adjacent valves)
Valve material: PTFE, PCTFE
Valve fitting: 1/4-28UNF inner thread
Signal input: 2 gates TTL Level signal input
Signal output: 3 gates TTL level signal outpump
Communication: RS485/RS232
Protocol: DT protocol
Bit rate: 9600bps/38400bps can set
Parameter setting: 7 digit dial switch
Chain communication: Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485
Firmware upgrade: Upgrade via computer RS232 interface
Status Display: 12-segment LED display operating status
Programming function: Ramp, cut-off speed, gap compensation, infuse speed, circulation, real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes
Working environment: temperature 15°C~40°C, relative humidity <80%
Storage envirionment: -20°C~65°C
Dimension: 110x44.5x127 mm
Weight:1.23kg