FilesThruTheAir Wireless Alert CM Contact monitor for connecting to volt-free contacts
• Contact monitor for connecting to volt-free contacts
| Cat. No. | Unit | Price | Quantity |
|---|---|---|---|
| MAAS503526-01 | Each | Inquiry |
|
Product Description
Product Description
The Wireless Alert CM monitors whether a volt-free contact, such as a relay or volt-free switch, is open or closed. It then automatically sends notification emails to a user-selected email address. The device body can be secured in position using an adhesive pad (supplied) and is provided with a 1.5m cable with bare ends, ready to connect to your equipment or switch.
Users can also configure delays (between 1 minute and 12 hours), whereby the contact must remain opened or closed for a certain period of time before an alert is sent. In addition to this, the device can send a scheduled summary email detailing a number of alert events, percentage of contact open and closed time, and current battery level.
Users can also configure delays (between 1 minute and 12 hours), whereby the contact must remain opened or closed for a certain period of time before an alert is sent. In addition to this, the device can send a scheduled summary email detailing a number of alert events, percentage of contact open and closed time, and current battery level.
Product Details
Product Type
Wireless Alert Sensors
Specifications
| Device Operating Temperature |
-18 to +54°C
0 to +129°F |
| Alert Notification States |
Contacts Open and/or Closed
|
| Alert Delay Range | 1 minute to 12 hours (user-selectable) |
|
Environmental Conditions
|
Indoor use only – IP5X |
|
Product Dimensions
|
69 x 32 x 22mm 2.7 x 1.3 x 0.9inches |
|
Cable length
|
1500mm 59inches |
|
Battery Type
|
2 x 1.5V Alkaline LR03/UM4/AAA |
|
Battery Life
|
2 years |
Related Products
Online Inquiry
Note: If you don't receive our verification email, do the following:
- Confirm that you entered your email address correctly.
- Check if the email is in your spam or junk folder.
- Or you may contact us at
.
