DYNABLOC, Segmented heating blocks for vials & tubes

Cat. No.	Specification	Unit	Price
LG01438473-01	Dynabloc segmented block, 12 (13x27.6mm) holes for 1/2 dram vials, 12 (15x27.6mm) holes for 1 dram vials, 8 (17x27.6mm) holes for 2 dram vials	EA	$404
LG01438473-02	Dynabloc segmented block, 12 (15x27.6mm) holes for 1 dram vials, 8 (17x27.6mm) holes for 2 dram vials, 4 (22x27.6mm) holes for 4 dram vials	EA	$404
LG01438473-03	Dynabloc segmented block, 1 (48.5mm dia) well for 50mL round bottom flask, 10 (17x50mm) holes for 16x100mm tubes, 4 (28x50mm) holes for 40mL vials	EA	$404

Add to Cart

Product Description

Product Description

Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Blocks, base plates, support rods and T-handle extractor can all be ordered separately.

Related Products

180°C High Heat Sterilization CO2 Incubator 248L

180°C High Heat Sterilization CO2 Incubator 185L

140°C High Heat Sterilization CO2 Incubator 248L, +4°C-60°C

Online Inquiry

Note: If you don't receive our verification email, do the following:

Confirm that you entered your email address correctly.
Check if the email is in your spam or junk folder.
Or you may contact us at .

GET IN TOUCH

Seamless access to cutting-edge products and services with our professional support.