Depth stop for samplers

To make a sampling procedure reproducible, it should always be performed under the same conditions. The depth stop for samplers is a useful accessory for this purpose. The depth stop can be clamped to the sampler at any height using a C-clamp screw. This ensures that the sampler penetrates to the same desired depth each time. The penetration depth is fixed and can be accurately recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling.

· Enables standardized and thus reproducible sampling
· Very good clamping effect due to C-clamping screw
· Available for 25/50 mm Ø, suitable for many sampler lances

The depth stop for samplers is useful in applications where sampling parameters must be accurately determined and defined, such as incoming and outgoing inspection of bulk materials that may segregate.