CoolHome-X2, Freezer (-22°C to -18°C)

▪ CoolHome is easy to assemble and use. Simply store the core in a freezer at -80 °C or -20 °C for a few hours (see table below).
▪ Select the corresponding energy core and insert it into the base of CoolHome during use.
▪ Put the required BlockHome test tube module on the frozen core, and then insert your test tube or plate sample into the BlockHome test tube module.
▪ If dry ice is selected, take out the freezing core, fill 300ml~400ml directly in the original position of placing the freezing core, and then put the BlockHome test tube module on the dry ice.
▪ If the X,X1 freezing core is taken out in the -80°C environment, it can be placed at room temperature for 10 minutes before being inserted into the base, so as to eliminate the excessively low surface temperature.

Cat. No.	Specification	Unit	Price	Quantity
LRE1437779-01	Temperature control range: -22°C to -18°C, Freezing core: X2 type, Module: optional, Holding time: up to 6 hours	Unit	$460

Cat. No.

Specification

Unit

Price

Quantity

LRE1437779-01

Temperature control range: -22°C to -18°C, Freezing core: X2 type, Module: optional, Holding time: up to 6 hours

Unit

$460

Product Description

Product Description

CoolHome is a benchtop, new energy efficient, environmentally friendly, safe, standardized, and additive free freezer that can freeze samples at low temperatures all day long without power, ice or batteries. Longe cryopreservation and accurate temperature control range, visible temperature, and highly stable thermal conductivity can achieve the standardization of product freezing series operation. The CoolHome is suitable for different samples and temperatures. The template is designed so that it can be used for general purpose devices. Depending on the core selected, the CoolHome-X core allows the sample to be frozen at 0°C to 4°C for more than 14 hours. CoolHome-X1 core can allow samples to be frozen at -20°C to 0°C for more than 14 hours. CoolHome-X2 core can allow samples to be frozen at -22°C to -18°C for more than 6 hours. CoolHome can also be used with dry ice to create a compact, portable and quick-freezing device for bacteria, viruses, proteins, etc, avoiding problems such as changes in sample temperature, degradation of RNA in nucleases, and microbial contamination of cultures. CoolHome is ideal for use in tissue culture hoods or other places where sterile procedures are required.

Features

▪ Provide all-day cooling or freezing of the sample without ice, electricity or batteries.
▪ X, X1 and X2 type freezer cores provide the required cold source to achieve the required temperature.
▪ The products are suitable for a variety of thermal tubes and modules, including automatic friendly sample module.
▪ Accurate temperature control, the temperature between holes is consistent to ensure the consistency of sample test results.
▪ The products can be sterilized by alcohol, high temperature, ultraviolet, and others.
▪ Durable outer material will not absorb liquid, if dropped will not break. Characterized by high durability and suitability for frequent and repeated use.
▪ Automated friendly sample modules and available devices can be used to briefly move cold samples to automatic instruments for processing.
▪ The products are equipped with a simple and convenient reading module, and the instant temperature can be read at any time.