Continuous Flow Cell Disruptor - Continuous Flow Processing with two models

The CF Cell Disruptor offers Continuous Flow Processing with two models, the CF1 and CF2. Both models offer the same process and differ only by process speed, the CF1 offers up to 6L per hour and the CF2 offers up to 24L per hour processing rates. Both models benefit from a HMI control, a maximum process pressure of 40kpsi (2700 bar), integrated sample cooling jacket, 200mL inlet reservoir (hopper), auto shut down feature for when the process is complete and both models take advantage of the precise and consistent hydraulic control which is fully scaleable through the whole product range from 0.5mL single preparation processing to large volume processing at 150L per hour. This precise control ensures that the entire sample is processed at the operators set pressure to ensure accurate and consistent results and in most cases a single process or pass is adequate meaning multiple passes are not required. Both models are capable of processing fluid or re-suspended sample types and are utilised for many sample types such as bacteria, yeast and algae.

• CF1 Model
At approximately 700mm² the CF1 is small enough to bench mount if required but is best suited when used on its tailor made trolley. The CF1 trolley ensures that the equipment is situated at its optimum working height and is mounted on full swivel and lockable casters that enables safe and free movement of the equipment when needed. The CF1 is recommended for process volumes in the range of 15mL through to 10L. For those processing larger volumes in this range then the CF1 can be offered with an integrated peristaltic pump fully controlled through the HMI which will ensure that the inlet reservoir is continually fed whilst recirculating the sample to help avoid any settling until the entire sample is processed.

• CF2 Model
With a footprint of approx. 700mm² the CF2 is a floor standing model that is recommended for process volumes from 15mL through to 100L. The CF2 is offered with an integrated peristaltic pump as standard. The CF2 is mounted on full swivel and lockable castors that enables safe and free movement of the equipment when needed.