AlphaSat® with Vectra® AlphaSorb® 10 TX1057 Pre-Wetted Cleanroom Wipers, Non-Sterile

AlphaSat® with Vectra® AlphaSorb® 10 dry cleanroom wipers are made from 100% two-ply polyester material with a sealed border, processed on the automated cleaning system. Vectra® advances the cleaning process and brings this technology to a higher level of wiper manufacturing.

The two-ply construction provides for both spill control and general wiping where contamination control and absorbency are of paramount importance.

Engineered for high-sorbency use in the most critical cleanroom environments, such as semiconductor and pharmaceutical manufacturing. All 4 cut edges are thermally sealed, forming a border to prevent particle and fiber release. AlphaSorb® 10 provides the optimum combination —absorbency, cleanliness and abrasion resistance.

· Ideal for spill control, cleaning, and solution application.
· Vectra® border seal technology provides low levels of ions, NVRs (non-volatile residues), particles and fibers for use in critical applications and environments.
· AlphaSat® with Vectra® AlphaSorb® 10 wipers provide a consistent, optimized cleaning effi ciency with repeatable wetness and VOC level.
· Excellent chemical resistance for compatibility with a variety of solutions.
· Meets USP <797> and USP <800> wiper requirements.

· Wiping and cleaning surfaces, equipment and parts.
· Applying and removing lubricants, adhesives, residues and other solutions including disinfectants.
· Cleaning with solvents such as isopropyl alcohol (IPA), ethanol, acetone, and degreasers.
· Appropriate for use with temperatures less than 400°F (205°C).