6ft. width 10" opening NSF Certified Class II A2 Biosafety Cabinet

Cat. No.	Dimensions (WxDxH)	Specification	Package	Unit	Price	Quantity
BC01503768-01	67 × 23.5 × 26"	HEPA filter: Two, with 99.999% efficiency at 0.3 μm diameter. Filter life indicator on controller.	79.5 × 42.5 × 76"	EA	$5,160

Add to Cart

Product Description

Product Description

A biosafety cabinet, also called a biological safety cabinet or microbiological safety cabinet—is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level.

Features

· NSF certified
· Great for COVID-19 specimen handling
· Motroized front glass viewing window
· Dual HEPA filters
· Large LCD display
· Filter life indicator
· Easy-to-clean stainless steel chamber
· Auto start and stop function (eg. UV lights)
· Automatic flow speed adjustment

Product Details

Accessory

Part description	Quantity
6 Ft Biosafety Cabinet with base stand	1 pc
Remote	1 pc
Bottom drain port assembly	1 set
Backup UV light tube	1 pc
Hex wrench	1 pc
Front glass panel motor adjusting tool, plastic	1 pc
Fuse (for glass panel control board)	5 pcs
Hex bolt	5 pcs
Big, small washer and lock washer	4 sets
User's manual and Test report	1 set

Note

Caution! Installation requires a forklift or a crane.
Attention! Steps before and after using the unit.
· Step 1: Fully close the front glass panel, turn on UV light for 30 mins (you can use the timer setting). Users should leave the room during this disinfection period.
· Step 2. Raise the glass panel to recommended opening height, turn on air circulation for 10 minutes.
· After operation is done, fully close the glass panel, turn on UV light for another 30 minutes, then turn off the unit.
Important Guidelines using a biosafety cabinet
· No flammable and explosive substances (Building up of flammable material may cause an internal fire or explosion)
· No volatile chemicals (May cause damage to HEPA filters to the point where it allows particles to leak through)
· No toxic chemicals or materials (May reach room occupants)
· No open flame (Will disrupts air flow patterns)
· Minimal use (10mL or less) of decontaminant, such as 70% isopropyl or ethyl alcohol is allowed.
· We recommend using the following for disinfecting the surfaces of a BSC, depending on the agent to be controlled: Sodium hypochlorite (bleach), Ilodophors (Wescodyne), Phenolics (Hilphene, Vespene) and Quaternary ammonium compounds (Conflikt, EndbacII)
If gaseous, vaporized or aerosolized chemicals must be generated in a BSC, you should assure yourself that the quantity being generated will NOT cause a flammable or toxic risk

Specifications

Model	BSC-6FA2-NA(6')
Electrical requirements	110V 60Hz 1-Phase 500 watts
Chamber	Dimensions: 67 x 23.5 x 26" (WxDxH) Material: 304 stainless steel Power outlet with cover: two, < 500 watts Water port x 1, stainless steel Gas port x 1, stainless steel Surface height from ground: 29.5" Hanging bar: stainless steel, with 10 hooks
Lights	LED lights: 22W x 2, > 1000 Lux UV lights: 40W (Germicidal UV lamp, emission 253.7 nanometers) × UV lights available only when front glass panel is fully closed. × Recommended replacement interval: 600 hours
Air flow	Volume Inflow: 485 CFM (Cubic Feet per Minute) Downflow: 713 CFM Exhaust: 485 CFM Speed Inflow: 60-70 FPM (Feet per Minute) Downflow: 100-110 FPM × Air circulation available only when front glass panel is open
HEPA filter	Two, with 99.999% efficiency at 0.3 μm diameter Filter life indicator on controller
Front safety panel	Material: tempered safety glass (thickness > 5mm), dual-layer, laminated, UV blocking Recommended opening height: 10" Maximum opening height: 22"
Material	Chamber: 304 stainless steel Main body: powder coated steel
Controller	LCD screen with soft touch buttons and remote control
Noise	< 65 dB(A)
Casters	Four, with stationable feet
Unit/shipping dimensions	73.7 x 30.5 x 90.5" / 79.5 x 42.5 x 76" (WxDxH)
Shipping weight	816 Lbs
Safety	Abnormal airflow alarm Filter replacement alarm Front glass panel unsafe height
Compliance	NSF
Warranty	Three years
Lead Time	About 10 to 15 working days after receive payment