BioReset Plus V2.0 VPHP Generator

SINGLE USER INTERFACE, INFINITE CONNECTION MODES
Bioreset generator is equipped with proprietary software, removable tablet and Wi-Fi signal generation module.

The access to Bioreset software is done remotely in different ways:
• by connecting on board tablet or any other device via cable to the machine
• via Wi-Fi network when close to the machine
• with the machine connected to the corporate network, from any device connected to the same LAN

The operator then has a single user interface that can be accessed from any device via direct connection, Wi-Fi or via a corporate network connection.
Since Bioreset software resides on the generator, the operator can choose to stay connected during all phases of the biodecontamination cycle or connect to start the cycle and reconnect later to monitor its progress.
Proximity to a machine also allows the operator to manage other Bioreset Plus generators located within the Wi-Fi network via the mesh function.

• PPM probe to check H2O2 concentration during the cycle.
• Catalyzer for exhaust or return air with internal blower on request.
• Special pipe dimensions on request.
• Safety devices for personnel safety
• SW 21 CFR Part 11 Compliance
• Turboflow, a versatile system for ultra-fast H2O2 distribution

Suitable for biodecontamination of volumes up to 500 m3 , Bioreset Plus is the most flexible and complete vapor-phase hydrogen peroxide generator.
• Clean room for sterile production
• Isolator for sterility test
• Pass box